So Who Bought A Perentie?

Quote:

---

Originally Posted by usi

Picked mine up today FFR with 140k on it, Rego was a breeze plates were secured with cable ties Then began what im going to refer to as White Knuckle Terror.
This vehicle is not something you want to relearn driving a manual in, the truck is an absolute handful to manage for the un-inducted!
SHAKE RATTLE AND ROLL BABY!

Overall the truck is in pretty schmick condition with something like 900hrs of preventative servicing and repairs which are all documented, It received a newly reconditioned Gearbox and transfer case 10k ago

Minor rust on axles and springs ect some dodgy wiring which i will need to repair but other than that i am really stoked with it

Most of the auction was purchased by dealers, car transporters were turning up while i was there. So i expect there will be a few on the market with another 5k on top again.

---

How much ? Bob

Quote:

---

Originally Posted by usi

... some dodgy wiring ...

---

so lucas OEM spec then

G'day Usi :)

You will get used to it :) the LT95A gearbox works very well, and you should be able to bolt an overdrive onto it, the standard LT95 takes one :)
you will also get used to the heavy steering similar to a 6 cylinder Series 3 :D they do not have a turning circle, they have an ORBIT :eek: they shake when you shut them down, but when driving it is like riding a Ducati 750 or a vibrator which is similar, 110kph is WARP Speed :D

But, if I could afford one I would have one tomorrow hard or soft top I am not choosey

cheers

Quote:

---

Originally Posted by UncleHo

G'day Usi :)

You will get used to it :) the LT95A gearbox works very well, and you should be able to bolt an overdrive onto it, the standard LT95 takes one :) ...
..

---

...and so it can Uncle (if you can find one), but it's not really recommended for use with the 4BD1, only the V8 (something about handling the torque :o)

Quote:

---

Originally Posted by 87County

...and so it can Uncle (if you can find one), but it's not really recommended for use with the 4BD1, only the V8 (something about handling the torque :o)

---

true enough, you cant expect something that was only designed to deal with a v8 to handle the suzi and last

Quote:

---

Originally Posted by 87County

...and so it can Uncle (if you can find one), but it's not really recommended for use with the 4BD1, only the V8 (something about handling the torque :o)

---

Also depends on whether the FFR has a winch. If it has the mil Powauto winch setup you cannot fit an overdrive as the gear on the rear of the mainshaft is different to the civvy one and has teeth to drive the chain for the underdrive pto. To fit an overdrive you would have to change the gear and that would mean NO pto drive. Considering it has had a reco box fitted I would suspect that it would most likely have this gear fitted whether it has a winch or not. Anyway a waste of time/money behind an Isuzu.

Quote:

---

Originally Posted by UncleHo

G'day Usi :)

You will get used to it :) the LT95A gearbox works very well, and you should be able to bolt an overdrive onto it, the standard LT95 takes one :)
you will also get used to the heavy steering similar to a 6 cylinder Series 3 :D ....

---

I'd be fitting one of "The Grubbs" Isuzu MSA 5 speed/LT230 conversions before I fitted a Fairey/GKN overdrive.

Also the Defender/Disco 1 & 2/and RRc 4 bolt steering box replaces the manual perentie steering box and the Isuzu PAS pump bolts onto the front timing case of the 4BD1 so you don't have to put up with armstrong power steering.

....well. I guess that's one!

Now what about the pichas!

Quote:

---

Originally Posted by usi

Picked mine up today FFR with 140k on it, Rego was a breeze plates were secured with cable ties Then began what im going to refer to as White Knuckle Terror.
This vehicle is not something you want to relearn driving a manual in, the truck is an absolute handful to manage for the un-inducted!
SHAKE RATTLE AND ROLL BABY!

Overall the truck is in pretty schmick condition with something like 900hrs of preventative servicing and repairs which are all documented, It received a newly reconditioned Gearbox and transfer case 10k ago

Minor rust on axles and springs ect some dodgy wiring which i will need to repair but other than that i am really stoked with it

Most of the auction was purchased by dealers, car transporters were turning up while i was there. So i expect there will be a few on the market with another 5k on top again.

---

Spotted 2 separate perentis today , I was driving a truck from melb to sydney , Spotted the first one a soft top complete with trailer with Nsw plates in Tarcutta then spotted another a hard top with trailer aswell about a hour latter both heading south:cool:

Quote:

---

Originally Posted by bob10

How much ? Bob

---

12k On the road