Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: Bolts tightened now turbo whistles. Why?

  1. 22nd July 2013, 05:43 PM #1
    alittlebitconcerned
    alittlebitconcerned is offline Master
    Join Date
    Feb 2010
    Location
    sydney
    Posts
    847
    Total Downloaded
    0

    Bolts tightened now turbo whistles. Why?

    Hello all.

    I recently had a new decat pipe installed in my Puma.
    During the process a bolt snapped off which meant the turbo had to come out as well. No drama.

    The mechanic said to drop around afer a few weeks so he could check the tighness of all the bolts to make sure they had bedded properly and I did that today. One of his young guys put a rattle gun over all the bolts they touched during the install and said all was good.

    After leaving I heard an obvious turbo whistle that wasnt there before.
    I also heard once the sound of something that I can only describe as a high speed metallic 'flapping' sound that slowed down and disappeared as I came to a stop. I haven't heard that 'flapping' sound again in the last hour I've been driving but the turbo whistle is there. It's not loud, but it is there.

    What I'm wondering is...

    A) Had bolts loosened after the decat was installed and the turbo put back on? Now they have been tightened back up I can hear the result of extra boost in the form of turbo whistle which I will come to love? Or...

    B ) The rattle gunning young bloke snapped a bolt resulting in gasses escaping which is making the turbo whistle. Or...

    C) None of the above, phone a friend or use a lifeline Eddie.

    I'm taking it back tomorrow for the mechanic to have a look see, he thought mabey it something to do with the heat shield (?).
    Regardless , I'm interested in what others think the reason is.

    Cheers.
    Reply With Quote Reply With Quote
  2. 22nd July 2013, 05:48 PM #2
    bitdist
    bitdist is offline Master
    Join Date
    Jan 1970
    Location
    Melbourne
    Posts
    197
    Total Downloaded
    0
    I'd go for B especially if they went near the exhaust manifold
    Reply With Quote Reply With Quote
  3. 22nd July 2013, 05:52 PM #3
    alittlebitconcerned
    alittlebitconcerned is offline Master
    Join Date
    Feb 2010
    Location
    sydney
    Posts
    847
    Total Downloaded
    0
    Thanks for the reply. Do you think A) is not possible? Trying to look on the bright side.
    Reply With Quote Reply With Quote
  4. 22nd July 2013, 05:52 PM #4
    LandyAndy's Avatar
    LandyAndy
    LandyAndy is offline RoverLord Gold Subscriber
    Join Date
    Feb 2004
    Location
    Williams West Aust
    Posts
    20,998
    Total Downloaded
    0
    Surpises me that one would use a rattlegun to check bolt tension
    Wouldnt be surprised if he broke one
    Andrew
    DISCOVERY IS TO BE DISOWNED
    Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
    Snow White MY14 TDV6 D4
    Alotta Fagina MY14 CAT 12M Motor Grader
    2003 Stacer 525 Sea Master Sport
    I made the 1 millionth AULRO post
    Reply With Quote Reply With Quote
  5. 22nd July 2013, 06:02 PM #5
    alittlebitconcerned
    alittlebitconcerned is offline Master
    Join Date
    Feb 2010
    Location
    sydney
    Posts
    847
    Total Downloaded
    0
    That's what I thought. Not much 'feel' in a rattle gun I would think.
    Reply With Quote Reply With Quote
  6. 22nd July 2013, 06:07 PM #6
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,495
    Total Downloaded
    0
    I smell a screwed gasket or a warped manifold.

    Id also be looking around for a tub of tigerbalm to lube the rattle gun with before you jammed it up the young blokes clacker as you smacked him in the face with a torque wrench.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  7. 22nd July 2013, 06:44 PM #7
    LandyAndy's Avatar
    LandyAndy
    LandyAndy is offline RoverLord Gold Subscriber
    Join Date
    Feb 2004
    Location
    Williams West Aust
    Posts
    20,998
    Total Downloaded
    0
    Quote Originally Posted by Blknight.aus View Post
    I smell a screwed gasket or a warped manifold.

    Id also be looking around for a tub of tigerbalm to lube the rattle gun with before you jammed it up the young blokes clacker as you smacked him in the face with a torque wrench.
    Spannerboy may be alittlebitconcerned
    Get some pics
    Andrew
    DISCOVERY IS TO BE DISOWNED
    Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
    Snow White MY14 TDV6 D4
    Alotta Fagina MY14 CAT 12M Motor Grader
    2003 Stacer 525 Sea Master Sport
    I made the 1 millionth AULRO post
    Reply With Quote Reply With Quote
  8. 22nd July 2013, 07:59 PM #8
    alittlebitconcerned
    alittlebitconcerned is offline Master
    Join Date
    Feb 2010
    Location
    sydney
    Posts
    847
    Total Downloaded
    0
    Quote Originally Posted by Blknight.aus View Post
    I smell a screwed gasket or a warped manifold.

    Id also be looking around for a tub of tigerbalm to lube the rattle gun with before you jammed it up the young blokes clacker as you smacked him in the face with a torque wrench.
    Because I've had a turbo whistle in the past I thought I already had a warped manifold and/or stuffed gasket before the decat pipe install.
    I bought a 3mm annealed copper gasket, stronger bolts and nord lock washers and had the mechanic use these instead of the standard stuff.. I also asked him to run a straight edge over the face to see if there was any warp and there was none.
    It turned out that the previous whistle was only due to the turbo bolts on the manifold side working loose. Either way I now know I have a warp free face, upgraded copper gasket, bolts and washers... and now a turbo whistle.

    With all of this good stuff used on the decat pipe install is there any other reason I would be now getting the turbo whistle aside from them busting the bolts? Hoping not to need the Tiger Balm but it's in the glove box ready.
    Reply With Quote Reply With Quote
  9. 22nd July 2013, 08:51 PM #9
    LandyAndy's Avatar
    LandyAndy
    LandyAndy is offline RoverLord Gold Subscriber
    Join Date
    Feb 2004
    Location
    Williams West Aust
    Posts
    20,998
    Total Downloaded
    0
    Maybe give it a week or 2,by this time you SHOULD be able to see soot stains if there is a gasket leak.
    Give spannerboy the tigerbalm anyhow just as a life learning thing
    ENJOY
    Andrew
    DISCOVERY IS TO BE DISOWNED
    Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
    Snow White MY14 TDV6 D4
    Alotta Fagina MY14 CAT 12M Motor Grader
    2003 Stacer 525 Sea Master Sport
    I made the 1 millionth AULRO post
    Reply With Quote Reply With Quote
  10. 22nd July 2013, 08:59 PM #10
    Roverlord off road spares
    Roverlord off road spares is offline AT REST
    Major part of the heart and soul of AULRO.com
     Vendor

    Subscriber
    Join Date
    Jul 2012
    Location
    Tecoma Vic
    Posts
    9,642
    Total Downloaded
    0
    Why get anal about torque figures when you just rattle gun everything NOT

    Reply With Quote Reply With Quote
Page 1 of 2 12 LastLast
« Recent remould tyre thread? | Now, what everyone wants to know, How did dinosaurs have sex? »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!