Thread: Watertank for 2013 Defender 130 HCPU

I have a tank that fits there in a Tdi and its rectangular - if you measure iup the box I can let you know if it fits.

No obstructions. if you check my thread in in Members Rides

http://www.aulro.com/afvb/members-ri...0-build-2.html

there is a pic of seats and box removes, so that is what is underneath.

Newhue was also involved in getting some tanks make up and may be able to help as well.

cheers

Cheers, will do.

So this pic is your baby with no back seat or box, so it is just a clean flat surface eh?

When you measure inside the box, you will need to deduct/take into account the bolts that hold the seat mounting mechanism. These bolts will protrude into the box. I ground these down a little. I also had the clips for the jack handle protrude into the box as well....I just removed these altogether.

I think my measurements won't be far off - just need to take into account the different seat mountings between my 98 and your 2013

Cheers

Originally Posted by Ken2106

So this pic is your baby with no back seat or box, so it is just a clean flat surface eh?

Sure is...and it is a 2013

That's great. Cheers

Rear seat box measures externally 1335 x 380 x 145 (which is pretty much the same as suggested). So by the time we allow for bolts/nuts protruding internally (front and top) I'd say 1320 x 360 x 125 would be max useable space then I guess the pump and fittings need to fit in there as well.


Thanks for the help guys, all good. Have a great Chrissy.