Quote:
Originally posted by barney
the correct method of recovery on a toyota is;-
1. connect snatch strap to landy
2. run strap out to toyota, leaving at least a 4-5 metre loop on the ground
3. place shock damper ( mail bag or similar) over strap
4. connect drag chain to strap.
5. connect free end of drag chain securely to front axle of toyota
6. really give your landy a gut full providing similar pulling force to that which would be applied to pull a toyota driver off your sister.
7. one front axle is removed from bog hole, concentrate efforts on gearbox and tranfer case.
8. repeat this process until all components of toyota are removed from boghole.
9 crack the top off a coldie, sit down and RECOVER while the happles toyo driver reassembles his truck.
technically, a snatch strap has not been used on the toyota, it has been used on the landy while a drag chain has been used on the toyo.
hope this helps