Got my gas bill the other day and at first glance thought it was quite reasonable. I then realised that it was an estimate and when I checked the meter it had almost 200 cubic meters more than what was estimated!
Seemed like a lot so I did a test to see what gas we used in one hour with the Gas heater (Flued Gas log fire) on a low setting.
Usage was 0.7 Cu Meters.
So if I understand this correctly to get the MJ per hour I need to do the following.
Cubic Meters x Heating value x Pressure factor
0.7 x 38.15 x 0.98 = 26.1 MJ
26.1 x 3.724 (cents per MJ) = 97 cents per hour.
I'm currently with Origin energy and wondering if anyone is getting a better price than 3.724 c/MJ and a supply charge of 51.60 c/day.
Found an old bill from 2001 the other day 1.1 c/MJ
Cheers
Mark
If it didnt heat so well,, and cook so well,,
after 5 years of bills in Toowoomba using it for hot water, heating and cooking I'm of the opinion I wouldnt chase it--
"How long since you've visited The Good Oil?"
'93 V8 Rossi
'97 to '07. sold.![]()
'01 V8 D2
'06 to 10. written off.
'03 4.6 V8 HSE D2a with Tornado ECM
'10 to '21
'16.5 RRS SDV8
'21 to Infinity and Beyond!
1988 Isuzu Bus. V10 15L NA Diesel
Home is where you park it..
[IMG][/IMG]
A useful site to compare energy retailers. you can get some discounts but its a bit like petrol pricing....
https://www.energymadeeasy.gov.au/
Regards,
Tote
Go home, your igloo is on fire....
2014 Chile Red L494 RRS Autobiography Supercharged
MY2016 Aintree Green Defender 130 Cab Chassis
1957 Series 1 107 ute - In pieces
1974 F250 Highboy - Very rusty project
Assorted Falcons and Jeeps.....
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks