Electric Lawmowers

And i have more important things to do than resurrect old tip mowers and keep them going, buying petrol in small quantities, checking oil, finding my earmuffs etc.....[emoji1]

Quote:

---

Originally Posted by Vern

And i have more important things to do than resurrect old tip mowers and keep them going, buying petrol in small quantities, checking oil, finding my earmuffs etc.....[emoji1]

---

It's not like I'm fixing them every week, I like the challenge of fixing stuff. Recycling is good for the environment.
Buying petrol in small quantities....maybe about 3 times a year.
I know where my ear protectors are and don't have to find them [bigsmile1]

Each to their own.



Colin

Hi,
Best mod I ever did to an old mower that was hard to start, (wind up recoil type) was expose the 17mm nut on the top.
The Sher electric drill would start it in seconds if I didn't get spun off my feet.
Cheers

And my mower broke so needed a new one, why would i replace it with one thats more hassle in every way. Kids can do the mowing now, win win for me. [emoji846]

Quote:

---

Originally Posted by vnx205

How old was the battery in your friend's Ryobi?

---

The mower and batteries were brand new - was only on its second mow.

The block is a standard suburban block of 650sqm so about 300sqm of my lawn + about 80sqm of nature strip. My neighbour has a 18v Ryobi on a smaller block and he takes three charges to mow his.

I get 1 1/2 mows out of one tank with the 6hp Briggs and Stratton. No mixing fuel just pour it in and go. The other aspect of the battery mowers is they are all plastic - my ICE is 21 years old and this is its first issue - the cast metal underside looks like it has been peppered with a shotgun a few times but is still fine - I wonder how the plastic battery mower will be going in 21 years time.

Quote:

---

Originally Posted by 101RRS

The mower and batteries were brand new - was only on its second mow.

The block is a standard suburban block of 650sqm so about 300sqm of my lawn + about 80sqm of nature strip. My neighbour has a 18v Ryobi on a smaller block and he takes three charges to mow his.

I get 1 1/2 mows out of one tank with the 6hp Briggs and Stratton. No mixing fuel just pour it in and go. The other aspect of the battery mowers is they are all plastic - my ICE is 21 years old and this is its first issue - the cast metal underside looks like it has been peppered with a shotgun a few times but is still fine - I wonder how the plastic battery mower will be going in 21 years time.

---

Hopefully better than my ice mower, which lasted 3 years since moving near the beach as it rusted out beyond repair. (6 years old)

Quote:

---

Originally Posted by 101RRS

I wonder how the plastic battery mower will be going in 21 years time.

---

Battery technology will have moved on several times by then so it will become obsolete and be on hard rubbish or down the tip shop long before 21 years.....

Mind you, by then will we be able to buy petrol for our ICE vehicles & equipment ???

Perhaps one of these, I need the exercise !

Autumn mowing lawns and meadows with a scythe - YouTube


Colin

Quote:

---

Originally Posted by Vern

Hopefully better than my ice mower, which lasted 3 years since moving near the beach as it rusted out beyond repair. (6 years old)

---

That is why you do not buy a tin plate base - they all rust out - you need a cast alloy base mower - not a cheapie.

Quote:

---

Originally Posted by 101RRS

Interestingly the 6hp probably has a carb blockage issue stopping the governor to work correctly so will cost about $100 to get fixed, but a whole new Briggs and Stratton engine only costs between $350 to $400 so not much more than just one additional battery for the Ryobi.

Garry

---

Er, I'm confused, how do you spend $100 on a carby blockage ?? WHip that sucker off, give it a clean, throw it back on. Maybe 15minutes and no cost :)

If it only idle, I'm betting the throttle lever is stuck on "idle". Otherwise it would lean out and die if the run jets were blocked.

Quote:

---

Originally Posted by 101RRS

That is why you do not buy a tin plate base - they all rust out - you need a cast alloy base mower - not a cheapie.

---

Why, when i can get a nice quieter, easy to use for the whole family battery one, and not have to worry about getting fuel, and waking up the neighbourhood [emoji6]