Thread: PPSR AND NSW REGO DETAILS DON'T MATCH

What is a PPSR?

Put the actual chassis number (from the chassis not the paperwork) and someone should be able to advise.

I doubt a 55 series 1 chassis could be used on a Series 3 - 55 was 86" or 107" where a series 3 is 88" or 109" putting aside all the other differences in the chassis - could be done but unlikely.

Originally Posted by ErwinT

NEW PURCHASE - SERIES 3 LANDY

NSW REGO CHECK WITH CHASSIS NUMBER SHOWS 1974 SERIES 3 - CAR CURRENTLY REGISTERED ON HISTORICAL PLATES. HOWEVER PPSR CHECK DONE USING CHASSIS NUMBER SHOWS THE CAR AS 1955 SERIES 1 WITH COMPLIANCE 1974 - COULD PPSR HAVE INPUT THE WRONG DATA? OR SOMETHING MORE SINISTER?

ANY THOUGHTS?

Quite possibly a clerical error - does the vendor have any other providence (eg. expired rego papers, any receipts etc etc) ?

Chassis number /date range info could be available, does it present as a S3 ?

Originally Posted by garrycol

What is a PPSR?

Put the actual chassis number (from the chassis not the paperwork) and someone should be able to advise.

I doubt a 55 series 1 chassis could be used on a Series 3 - 55 was 86" or 107" where a series 3 is 88" or 109" putting aside all the other differences in the chassis - could be done but unlikely.

thanks - personal property securities register - online check for written off/stolen register, any encumbrances, bank security outstanding etc
chassis 903 056xxA engine 901715xxB

Originally Posted by 87County

Quite possibly a clerical error - does the vendor have any other providence (eg. expired rego papers, any receipts etc etc) ?

Chassis number /date range info could be available, does it present as a S3 ?

yep presents as an S3 - current rego states it is mid 70's landy s3 which all seems ok. chassis no + engine no given above. from what i can tell the chassis number is from a S3? its only the PPSR which is maybe a typo??

Originally Posted by 87County

Quite possibly a clerical error - does the vendor have any other providence

Or even provenance.

Originally Posted by ErwinT

chassis 903 056xxA

Entering that Chassis Number Into Calvin comes up with the following:

Model: Land Rover, Series III[/TD]

Body type: Basic

Wheel base: 88in

Engine: petrol

Model years: 1972-1979

Destination: Completely knocked down (CKD), right-hand drive (RHD)

056XX Serial number

Design: Unmodified


So that chassis number is for a 72/79 Series 3 - RHD

So there is an issue with the PPSR

Garry

Originally Posted by garrycol

Entering that Chassis Number Into Calvin comes up with the following:

Model: Land Rover, Series III[/TD]

Body type: Basic

Wheel base: 88in

Engine: petrol

Model years: 1972-1979

Destination: Completely knocked down (CKD), right-hand drive (RHD)

056XX Serial number

Design: Unmodified


So that chassis number is for a 72/79 Series 3 - RHD

So there is an issue with the PPSR

Garry

garry


thanks for information. Is there a database which can match the engine number to the chassis?

Originally Posted by ErwinT

garry


thanks for information. Is there a database which can match the engine number to the chassis?

Not really.

361xxxxxx Series III petrol 2286cc 8:1 CR 5-bearing
364xxxxxx Series III petrol 2286cc 7:1 CR 5-bearing
366xxxxxx Series III diesel 2286cc 5-bearing
895xxxxxx Series III diesel 2286cc 3-bearing (fitted to 88 inch airportable for export)
901xxxxxx Series III petrol 2286cc 8:1 CR 3-bearing
902xxxxxx Series III petrol 2286cc 8:1 CR 3-bearing
903xxxxxx Series III petrol 2286cc 8:1 CR 3-bearing
904xxxxxx Series III petrol 2286cc 7:1 CR 3-bearing
906xxxxxx Series III diesel 2286cc 3-bearing
941xxxxxx Series III petrol 2625cc
951xxxxxx Series III petrol 2286cc 3-bearing (fitted to 88 inch airportable)

So your engine comes in here "906xxxxxx Series III diesel 2286cc 3-bearing" which seems right

So you have the right chassis number and the what seems to be a correct engine.