Page 1 of 5 123 ... LastLast
Results 1 to 10 of 43

Thread: Cunningham Highway?

  1. #1
    RecMec Guest

    Cunningham Highway?

    Advise please: How steep-hard a climb is it up the A15 Cunningham Highway to Warwick from south of Brisbane? Will be running in a new 2.2 Puma in the Def, towing a camper, GCM of 3460 kgs.

  2. #2
    Join Date
    Apr 2012
    Location
    Whyalla, SA
    Posts
    7,549
    Total Downloaded
    0
    Can’t answer the gradient question, can advise you shouldn’t be towing anything until you have run the engine in.

  3. #3
    Join Date
    Apr 2019
    Location
    Brisbane
    Posts
    1,762
    Total Downloaded
    0
    Thats only just over GVM isn’t it? Although I didn’t realize modern motors needed running in after a rebuild.

    Tuck in behind a B-Double crawling up the range, you’ll only be doing walking pace.

  4. #4
    Join Date
    Dec 2007
    Location
    Back down the hill.
    Posts
    29,779
    Total Downloaded
    0
    It's not overly steep but long. If you're concerned you could go via Ma Ma Creek or the new second range crossing to Toowoomba then Warwick.
    Ma Ma would be my choice, it slower but has points of interest.
    If you don't like trucks, stop buying stuff.
    http://www.aulro.com/afvb/signaturepics/sigpic20865_1.gif

  5. #5
    Join Date
    Apr 2012
    Location
    Whyalla, SA
    Posts
    7,549
    Total Downloaded
    0
    Quote Originally Posted by W&KO View Post
    Thats only just over GVM isn’t it? Although I didn’t realize modern motors needed running in after a rebuild.

    Tuck in behind a B-Double crawling up the range, you’ll only be doing walking pace.
    States in the factory manual to not tow for first X kilometres. You could do it, being nice and it should actually help bed the motor in if not thrashed up the hill.

  6. #6
    Join Date
    Apr 2008
    Location
    Brisbane,some of the time.
    Posts
    13,888
    Total Downloaded
    0
    Quote Originally Posted by V8Ian View Post
    It's not overly steep but long. If you're concerned you could go via Ma Ma Creek or the new second range crossing to Toowoomba then Warwick.
    Ma Ma would be my choice, it slower but has points of interest.
    As said,it’s long not steep,just take it easy.

    I towed 3.2T up the old Toowoomba range,the D4 thought it had the anchor out

    Ian,what is the new Toowoomba range run like?

    Haven’t tried it yet,hoping it takes 1/2 hour or so off the run to Dirranbandi.

  7. #7
    Join Date
    Dec 2007
    Location
    Back down the hill.
    Posts
    29,779
    Total Downloaded
    0
    Quote Originally Posted by scarry View Post
    As said,it’s long not steep,just take it easy.

    I towed 3.2T up the old Toowoomba range,the D4 thought it had the anchor out

    Ian,what is the new Toowoomba range run like?

    Haven’t tried it yet,hoping it takes 1/2 hour or so off the run to Dirranbandi.
    It'd easily save half an hour in a truck, maybe twenty minutes in a car. It's nowhere near as steep as the tollbar, a steady climb coming out at Charlton, so not climbing to the altitude of Rangeview.
    I've come down in the Disco, locked in 3rd and didnhave to touch the brakes to maintain the speed limit.
    If you try it before Christmas, it's toll free, but watch out for the average speed cameras and flash for cash.
    If you don't like trucks, stop buying stuff.
    http://www.aulro.com/afvb/signaturepics/sigpic20865_1.gif

  8. #8
    DiscoMick Guest
    It's no problem, done it several times towing, just change down and keep the revs up a bit.
    We recently towed up a 31% slope on the Daintree in low-second, so compared with that the Cunningham is easy.

  9. #9
    Join Date
    Dec 2007
    Location
    Back down the hill.
    Posts
    29,779
    Total Downloaded
    0
    Quote Originally Posted by DiscoMick View Post
    It's no problem, done it several times towing, just change down and keep the revs up a bit.
    We recently towed up a 31% slope on the Daintree in low-second, so compared with that the Cunningham is easy.
    But you're not running in a new motor, Mike.
    If you don't like trucks, stop buying stuff.
    http://www.aulro.com/afvb/signaturepics/sigpic20865_1.gif

  10. #10
    DiscoMick Guest
    That's true, but I still don't think the Cunningham should be a problem. Just keep the revs around 2500-3000, I think.

Page 1 of 5 123 ... LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!