RAFFLE, again.

Quote:

---

Originally Posted by Epic_Dragon

As in use that in place of the hose completely? I'd just get some the length of this from start to end? :)

---

Yes, we do away completely with the silly steel elbow, and route it gently around the bottom to avoid rubbing on things, sometimes need to wrap it and cable tie too. It's a far better solution.

Thankyou :) where can the hydraulic reinforced hose be bought from? I tried to google it but just had a load of pdf pop up LOL

Quote:

---

Originally Posted by justinc

Yes, we do away completely with the silly steel elbow, and route it gently around the bottom to avoid rubbing on things, sometimes need to wrap it and cable tie too. It's a far better solution.

---

Quote:

---

Originally Posted by Epic_Dragon

Thankyou :) where can the hydraulic reinforced hose be bought from? I tried to google it but just had a load of pdf pop up LOL

---

The Pirtek catalogue suggests MPH-10 product code hose. It has a min bend radius of 110mm, and is perfect for low pressure and suction. Do you have a Pirtek outlet reasonably close?

Quote:

---

Originally Posted by DiscoMick

Ian tells me there is both DiscoMick and Disco Mick (who knew) so I didn't get his PMs as they went to the other one, who is inactive.

If the two of us got organised and started posting opposing opinions in the same threads we could cause total confusion, even more than I currently manage to cause on my own. [emoji1]

---

One of you is more than enough thanks....

Quote:

---

Originally Posted by justinc

The Pirtek catalogue suggests MPH-10 product code hose. It has a min bend radius of 110mm, and is perfect for low pressure and suction. Do you have a Pirtek outlet reasonably close?

---

Nearest would be South Adelaide or Regency Park.

Quote:

---

Originally Posted by Tins

One of you is more than enough thanks....

---

Spoilsport!
I could say anything and blame the other guy. Perfect alibi.

Quote:

---

Originally Posted by Epic_Dragon

I will look into trying some :) it may last thr trip as it did make it home from there so might be ok

---

Ignore that. Listen to Justin.

Quote:

---

Originally Posted by V8Ian

I'll have to run another raffle, Brian. [wink11]

---

1st prize, a night out with V8Ian, at a venue of your choice, 2nd prize, two nights.......[bigrolf]

Quote:

---

Originally Posted by Epic_Dragon

As in use that in place of the hose completely? I'd just get some the length of this from start to end? :)

---

Get longer, you will need to radius it wider and change the route it follows to clear stuff. 1m is plenty.

Quote:

---

Originally Posted by V8Ian

1st prize, a night out with V8Ian, at a venue of your choice, 2nd prize, two nights.......[bigrolf]

---

I'm in. Venue is the Dorchester in London...