They're just different in the valving. You will probably find a shock for leaf springs doesn't control a coil sprung vehicle very well (handling) and it may induce car sickness in some due to the bounce.
Gents
I’m looking for some long travel shocks for my old D1. As my old D1 is a bit of an old hack I don't want to spend big money on buying specialised shocks and unfortunately I can’t exactly find what I’m looking for but I did find a shock that meets the travel (Open/Close) I’m looking for but it’s designed for for a rear leaf end GU Patrol (Eye/Pin design).
I assume the valving in a coil shock would need to be stronger (if that's the right terminology) than a leaf sprung shock in order to control the Coil compression/rebound, so I also assume it would be wrong of me to use a leaf spring shock in a coil sprung vehicle?
I’m only talking about a local weekend play 4wd here and not looking to spend big money, so I’m looking at options of shocks from other vehicle types. I assume the valving in a Coil sprung vehicle shock would be valved in such a way that would that require more dampening / rebound than a shock on a leaf sprung vehicle, so if I was to use a shock designed for a leaf sprung setup that it would more than likely fade sooner or fail in a short period of time?
Just throwing it out there to see what others experiences have been...
They're just different in the valving. You will probably find a shock for leaf springs doesn't control a coil sprung vehicle very well (handling) and it may induce car sickness in some due to the bounce.
Cheers
Slunnie
~ Discovery II Td5 ~ Discovery 3dr V8 ~ Series IIa 6cyl ute ~ Series II V8 ute ~
Yes. Leaf springs have significant, often substantial, friction damping, so the hydraulic dampers are an 'extra', and will not have near as much damping as is needed with coils.
John
JDNSW
1986 110 County 3.9 diesel
1970 2a 109 2.25 petrol
What have a few of your suspension shops suggested?
Let them earn your business no need to do all the research yourself.
Cheers
Slunnie
~ Discovery II Td5 ~ Discovery 3dr V8 ~ Series IIa 6cyl ute ~ Series II V8 ute ~
Does anyone know of a website that would list various shock types and configurations for various vehicles? I just would like to see what options are out there...
correct but that shock was a very primitive shock. as was the oem series shock with the "valve" being little more than a plate with holes drilled in it and with the Gas control being non existant.
A very early spring valve shock with the dampening adjustment being the oil fill level would be exactly what you want but good luck finding someone that will still sell one thats not a racing shock.
Dave
"In a Landrover the other vehicle is your crumple zone."
For spelling call Rogets, for mechanicing call me.
Fozzy, 2.25D SIII Ex DCA Ute
TdiautoManual d1 (gave it to the Mupion)
Archaeoptersix 1990 6x6 dual cab(This things staying)
If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
If you think you're in front on the deal, pay it forwards.
Rob if you are in SEQ give Garth Smith a call at Carolls Suspension at Rocklea a bell. Very impressive place. Good knowledge and experience and very reasonable prices. Cheers
From memory patrol rear valving is pretty close to what landrover is, and 80series cruiser fronts are pretty close to what landrover is. So look for some +2" patrol/cruiser shocks, should give about 11" of travel from memory, and get a pin eye adapter (or make one) for the rears. Have used this combo a looong time ago and it worked quite well
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks