Printable View
here you go 110 HC . The defender 110 badge on the bonnet gives it away:D . It has series doors but they fit straight on a 110 and 90 anyway
https://www.aulro.com/afvb/images/im...006/09/353.jpg
https://www.aulro.com/afvb/images/im...006/09/354.jpg
http://img.auto.mail.ru/pic/editor/I...__pic__230.gif
http://www.csse.monash.edu.au/~lloyd...r/TombRdr2.jpg
http://www.csse.monash.edu.au/~lloyd...r/TombRdr3.jpg
In the Uk we had a speaccial edition tomb raider 110 and 90. We thoughtit was going to be somthing like the film one. And this was what we got as the tomb raider
http://www.lrch.nl/images/tomb-01.jpg
and the 90 one
https://www.aulro.com/afvb/images/im...006/09/352.jpg
This is the go, I have come to the realisation that my SIII ain't going to get rego'd therefore a rebuild is the go. Something similar to this could be the go, but I need to know if a 130tub would fit to a 109 or 100 inch chassis length and width wise.
A 130 tub basically cause it is possible to pick them up in this country.
Aha, So that's what it's all about! Going to turn your tired SIII into a grunty, action hero accessory? :twisted: Go Dobbo!:D
Well somebody has to do it, besides I gotta keep up with your disco don't I.Quote:
Originally Posted by DiscoDave
Not a replica just a similar vehicle to this and a wolf. With an SIII front.
I found this article on the car
http://www.lrm.co.uk/archive/Defender/TombRaider.html
http://www.expeditionexchange.com/trd/indexmain.shtml
quite a few good picies here
http://www.expeditionexchange.com/trd/indexmain.shtml
got in just before you on that one.
they did a seris high capity anyway. The differance between a 110 and 109 is taken up in the front drivers area and not the back. Like the 90 is 4 and 3/4 inches longer than the 88. But the rear tubes are the same inside dimentionsQuote:
Originally Posted by dobbo
Are you looking at a HC 130 full back or Crew Cab back HC