any body taken pics of those dash things fitted yet not the pod on top of the dash the one that replaces the radio mount
id like to see one fitted to a tdi with aircon:D
Printable View
any body taken pics of those dash things fitted yet not the pod on top of the dash the one that replaces the radio mount
id like to see one fitted to a tdi with aircon:D
Quote:
Originally Posted by Reads90
hey is that a nissan radio - same as the one in my mrs pulsar!
Ordered my Mud Console tonight. 67 GBP delivered to Brisbane in 5 working days.
OK, finally finished my pod & console. Here's some pics:
https://www.aulro.com/afvb/images/im...007/05/319.jpg
I now have volt meter for main batt., tach and boost gauges in the top pod, with volt meter for the Aux batt., vac. for the maxi lockers and air pressure for the onboard air tanks in the centre section.
https://www.aulro.com/afvb/images/im...2007/03/73.jpg
The big red light is for the low coolant alarm (together with a buzzer).
https://www.aulro.com/afvb/images/im...2007/03/74.jpg
The bottom section shows the amount cut off to fit with Aus spec A/C. I also made a couple of small brackets out of gavl sheet and used the existing screws in the fascia of the A/C. This gave me something to screw the bottom of the console to.
https://www.aulro.com/afvb/images/im...2007/03/75.jpg
EGT gauge and a new mechanical temp gauge sit in the factory dash, with the fuel gauge moved over to the far right.
https://www.aulro.com/afvb/images/im...007/05/410.jpg
Paul:)
That look really nice . Nice job
Top Job!
tell me one thing if you are not putting a radio in the console do you have to cut out the facia to make the console bracket fit?
No, if you're no putting anything "Deep" in the centre, I reckon you could get away without cutting the original dash.Quote:
Originally Posted by Dave110
For anyone about to do this, a jigsaw with a metal cutting blade was the quickest, least messy way of cutting the old dash up.
Paul:)
Nice !
That looks Neeto.....
Love it....
mmm need one for my ARB switches.....
i have been lazy and have not installed mine yet, any tips on running the wires through/behind the dash, do i have to pull the dash offQuote:
Originally Posted by Defender200Tdi