No problem Ali, sent you an e-mail via your website.
Printable View
No problem Ali, sent you an e-mail via your website.
Hey Ali,
Welcome back!
~~~~~~~~~~
200 tdi version: Gug,
300 tdi version: Cameron, rangieman, Reads90, dm td5,
Td5 version: Cameron_Def
~~~~~~~~~~
If we can get some confirmation from the other people earlier in this thread then we can add them to the consolidated list and keep moving towards closing the deal.
Cheers,
Cameron
OK folks,
On top of this list:
~~~~~~~~~~
200 tdi version: Gug,
300 tdi version: Cameron, rangieman, Reads90, dm td5,
Td5 version: Cameron_Def
~~~~~~~~~~
I have sent emails to the following forum members who have previously expressed interest to see if we can lock down our list as quickly as possible and secure the best discount we can manage:
Michael2
Bluetongue
gruntfuttock
dullbird
1103.9TD
VladTepes
LRHybrid100,
CraigE
Sandtoyz
Also I have sent private messages to:
Dave110
TREX
So let's wrap this thing up quickly guys ...
Cameron
Yep I'm in fella's, i need one to fit a 2000 td5. Any insight on price yet???
I'm still interested in one but I'm still not convinced that it will fit 300 Tdi's with air con so I've sent these photos to mudstuff for their opinion so when I hear from them I'll let people know.
My concerns are that some of the photos we have show that the pod has a lip on it that fits under the facia (see photo) and that the Aussie fitted air con screws to the front of the facia so without some modification eg removal of lip or cutting or sliding behind the air con bracket it won't fit
what are others opinions?
However! there are photos of the pod that seems not to have the lip so maybe the design has been changed
Do you reckon it would fit my dash??
https://www.aulro.com/afvb/images/im...007/02/333.jpghttps://www.aulro.com/afvb/images/im...007/02/334.jpg
Count me in guys, be a lot tidier than my current setup!.
Quote:
Originally Posted by TREX
Yteah but you would have to take out the grey try where your radio is
speaking of such how hard is it to remove said radio mount :DQuote:
Originally Posted by Reads90
Quote:
Originally Posted by rangieman
Easy
It sits under the top black bit and then 2 screws hold it to the back. The just pulls out
So take you stearo out and then undo the two screws and you should be able to just twist and pull it out from the black top of the dash