have a look here
http://www.aulro.com/afvb/showthread...ghlight=Flares
Printable View
have a look here
http://www.aulro.com/afvb/showthread...ghlight=Flares
Thanks for that mate.
Are yours the LRA $450 kit???
Andrew
yup - got mine from Graham Coopers - LRA local supplier
HTH
LRH
The flares on this Rangie (DRanged) are just rubber flare edging, with the cut what ever size you need.
You can get some from the UK that are Flexible like this http://www.innovation4x4.co.uk/arches.htm or the fibreglass ones from LRA.
Hope this helps.
I dont know why you would say fibreglass is hard to fix, as long as you have a bit of room underneith for a couple of extra layers for strength your fine.
Bit of bog and flow coat and your done.
Paint and re fit.
The problem with the fibreglass ones, is that you generally wreck the gaurd before breaking the flare
Yep, could do with some sill protectors, don't forget Andrew if you put bigger tyres on then you will need to think about what extra strain you will put on the rest of the drive train...................mmmmmmmmmmm............35" tyres, 4" lift, RC gearing in the TC...........
Since you like them sooo much ,here is another shot of said Rangie in action