Reply With Quotebunnings has a teeny one for less than $200, wasnt paying much attention at the time I wasnt looking at chainsaws but if your only doing light stuff it should do.
Master
Hey fella's am looking at buying a new chainsaw in the next few days. has anyone been down this road and have any tips?? i only want a tiny one so i can take it camping so the smaller the better.so if you have any tips it would be great.
Cheers from the Desert
Rexy
2000 130 TD5
Oil in the Harness, suspension knock, transmission clunk, engine oil leaks, exhaust manifold leaks, centrifugal oil filter stripped bolts, a/c leaks, door leaks, wouldn't trade it for the world
RoverLord
bunnings has a teeny one for less than $200, wasnt paying much attention at the time I wasnt looking at chainsaws but if your only doing light stuff it should do.
Dave
"In a Landrover the other vehicle is your crumple zone."
For spelling call Rogets, for mechanicing call me.
Fozzy, 2.25D SIII Ex DCA Ute
TdiautoManual d1 (gave it to the Mupion)
Archaeoptersix 1990 6x6 dual cab(This things staying)
If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
If you think you're in front on the deal, pay it forwards.
Master
Sorry dave no bunnings for about 2000k's but i'll check out the local hardwareOriginally Posted by Blknight.aus
Cheers from the Desert
Rexy
2000 130 TD5
Oil in the Harness, suspension knock, transmission clunk, engine oil leaks, exhaust manifold leaks, centrifugal oil filter stripped bolts, a/c leaks, door leaks, wouldn't trade it for the world
YarnMaster
Still, have the 'mini boss' for $499 or somthig like that. Its quite small I think its got a 12" bar. So not big. I've got a wood boss the next one up 16" bar. Cost $650.
Good luck
RoverLord
A lady farm owner I do work for has a STHILLLL miniboss BRAND NEW.Its a MEGAPOSSS,never starts,if it dont go second pull it aint going to go.Been back to the shop 5 times sthill the same,they fob her off as a silly old woman!!!!! I know my away around a chainsaw,there is BIG problems with that LITTLE still!!!!!!
PS,Im the only one to use it since brand new!!!!
Buy a better quality bigger secondhand saw and put a small bar on it.
Andrew
DISCOVERY IS TO BE DISOWNED
Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
Snow White MY14 TDV6 D4
Alotta Fagina MY14 CAT 12M Motor Grader
2003 Stacer 525 Sea Master Sport
I made the 1 millionth AULRO post
RoverLord
home hardware (the one with the dogolog) was selling a similar unit for a similar price, I reccomended one to a bloke in melb who came camping with us once and when he came again he bought it with him for some saw 101. For the short time that we used it it did the job nicely although It needed sharpening after about 30 mins worth of work...
I recommended he take it to a saw shop and get a better chain for it. he forked out $80 for the new chain and hasnt used it since... (included fitting, tensioning and a service)
Dave
"In a Landrover the other vehicle is your crumple zone."
For spelling call Rogets, for mechanicing call me.
Fozzy, 2.25D SIII Ex DCA Ute
TdiautoManual d1 (gave it to the Mupion)
Archaeoptersix 1990 6x6 dual cab(This things staying)
If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
If you think you're in front on the deal, pay it forwards.
RoverLord
$80 for a chain on a toy saw BOLLOCKS!!!!!!!!
Just bought an oregon FULL CHISEL,21" for $48!!!!!
They charge by the drive link,so a 10" play chain,would be at least half what I payed!!!!
Andrew
DISCOVERY IS TO BE DISOWNED
Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
Snow White MY14 TDV6 D4
Alotta Fagina MY14 CAT 12M Motor Grader
2003 Stacer 525 Sea Master Sport
I made the 1 millionth AULRO post
RoverLord
it also got fitted and the whole saw serviced...
I didnt think that was too bad a price... given the new chain on my cullock cost me $30 and I was quoted $120 to service it...
Dave
"In a Landrover the other vehicle is your crumple zone."
For spelling call Rogets, for mechanicing call me.
Fozzy, 2.25D SIII Ex DCA Ute
TdiautoManual d1 (gave it to the Mupion)
Archaeoptersix 1990 6x6 dual cab(This things staying)
If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
If you think you're in front on the deal, pay it forwards.
RoverLord
AND A CHAISAW NEEDS A SERVICE AFTER 30MINS WORK!!!!!!!!!
TENSION THE CHAIN,YEP YOU DO THAT WHEN YOU PUT A NEW ONE ON!!!!!
ANDREW
DISCOVERY IS TO BE DISOWNED
Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
Snow White MY14 TDV6 D4
Alotta Fagina MY14 CAT 12M Motor Grader
2003 Stacer 525 Sea Master Sport
I made the 1 millionth AULRO post
RoverLord
Its done more than 30 mins work, I had to sharpen the chain after we'd been using it for 30 mins (but we were cutting wet wood).... after sharpening to guess Id say we put 3-4 more hours on it that weekend... who knows what hes used it for since...
Dave
"In a Landrover the other vehicle is your crumple zone."
For spelling call Rogets, for mechanicing call me.
Fozzy, 2.25D SIII Ex DCA Ute
TdiautoManual d1 (gave it to the Mupion)
Archaeoptersix 1990 6x6 dual cab(This things staying)
If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
If you think you're in front on the deal, pay it forwards.
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks