Thread: Free RRC cargo barrier - Perth

You should be able to make it fit. Its is similar to one I put in my old RR.
There are no real mounting points so you need to make an extension up to the whell arch. I did overkill and use 40mm square tubing and 10mm plate. A bit of work but it will not fold.
These are only regarded as dog guards not cargo barriers as they are not rated.

Taz looks very simmilar to whats in my 89 The brakets fit on top of the seat button release with captive nuts underneath.
Brad

Thanks Graig & Brad,

Yes it does fit the roof line nicely, but it would need some work to suit my '89. I tried to get it on the same box section as the seat release button but was'nt happy with the fit. Whilst it looks like it will bolt straight in to another rangie if someone wants to try.

I decided to make some decent tie down points for the heavy stuff in the back instead.

Cheers,
Taz.

Originally Posted by Bradtot

Taz looks very simmilar to whats in my 89 The brakets fit on top of the seat button release with captive nuts underneath.
Brad

Brad, you are correct. I did not like to fit mine that way as it looked very flimsy and did not work that out straight away.

Hi Taz

I was going to try and make one but I think it would be much easier to "make" an existing one fit than bodge up one of my own.

I have a 81' two door, I would like to try and see if I can make it fit I can collect it anytime that is good for you, (evening or weekend) if it's still available.

Steve