Thread: recommendations for a suspension speacialist

Originally Posted by Bushwanderer

Hi All,
A bit off-topic, but any 4WD group of which I'm a member will have to accept my standard suspension (& chicken runs, where necessary)

Cant remember you had a front bar ah

the only thing stopping a disco is ground clearance there is always a chicken track I use them often my pet hate is doing bog holes I dont mind if its the only route but dont do them if I dont have to

Originally Posted by Tusker

I feel a Put Up or Shut Up day coming on...

Actually might be a bit of fun to compare different setups back to back..

Slunnie when are you moving??

Regards
Max P

PUOSU! I love it, and I'll make sure I'm there to watch.... if I can.

Gday Max, the removalists are coming on the 27th, so I'm hoping that it'll all be happening on the 27/28 Dec. After that I'm hoping to come back to Sydney again until the end of the year and to head back out to Orange again sometime early in the new year. I'll head down for some Jan driving though!

Originally Posted by ROVERNIT

Cant remember you had a front bar ah

the only thing stopping a disco is ground clearance there is always a chicken track I use them often my pet hate is doing bog holes I dont mind if its the only route but dont do them if I dont have to

Bull bar fitted yesterday. ARB Deluxe bar in black. It looks "smick" ('sp). It even extends down to protect the lower section of the radiator.

Originally Posted by Bushwanderer

Bull bar fitted yesterday. ARB Deluxe bar in black. It looks "smick" ('sp). It even extends down to protect the lower section of the radiator.

Are you putting a rear steel bar on mate I would already ripped mine off then the draws then the suspension and tryes what was it 6 inch lift on the D3 4 springs and 2 body lift

this may have solved my problem mmmmmm it adjust to 290mm to 320mm any way around the ends I only have 4 inch down travel on the front then the front ACE arm binds


Attachment 5645

Originally Posted by ROVERNIT

this may have sold my problem mmmmmm it adjust to 290mm to 320mm any way around the ends I only have 4 inch down travel on the front then the front ACE arm binds


Attachment 5645

MMM more infor would be good! Supplier, cost etc.
CraigE