Results 1 to 8 of 8

Thread: Defender Snorkle

  1. #1
    Join Date
    May 2007
    Location
    Newcastle
    Posts
    878
    Total Downloaded
    0

    Defender Snorkle

    hi all, i'm wanting to put twin snorkels on my county and have noticed that safari do one for both sides
    ss525hf (drivers side) for the county and
    ss500hf (passenger side) 200 TDI

    does anyone know for sure wether these two snorkels are EXACTLY the same aesthetically (other than being for opposite sides) or are there subtle differences.

    jason

  2. #2
    Join Date
    Jan 1970
    Location
    Wheelers Hill, Melbourne
    Posts
    4,085
    Total Downloaded
    0
    I have two on my project vehicle , one is for a 200tdi, the other a 300tdi.
    The 300tdi is slightly larger and if you look at one then the other then back, its noticable. But you would need to know to look



    These were repairable too..

  3. #3
    Join Date
    May 2007
    Location
    Newcastle
    Posts
    878
    Total Downloaded
    0
    thanks mate any ideas as to what the size comparison is between a 200 tdi and a v8 one

    jason

  4. #4
    Join Date
    Mar 2007
    Location
    perth western australia
    Posts
    1,477
    Total Downloaded
    0
    Hey butt

    just a quick thought will the standard snorkels fit as youve got your roll cage (oops sorry roof rack support) running through the wing it looks like it might foul the snorkel ?

  5. #5
    Join Date
    Sep 2007
    Location
    Gold Coast
    Posts
    6,078
    Total Downloaded
    0
    Ken's correct. The safari ones wont fit if there is anything running up the windscreen pillar, ie a cage.

    Pete.

  6. #6
    Join Date
    May 2007
    Location
    Newcastle
    Posts
    878
    Total Downloaded
    0
    i thought i might get away with it as the cage is kind of in front of the pillars and the snorkel is kinda offset on the outer edge of the pillar perhaps i'll just order the one and find out.
    any one want a cheap snorkel if it doesn't fit?

    jason

  7. #7
    Join Date
    Jan 1970
    Location
    Wheelers Hill, Melbourne
    Posts
    4,085
    Total Downloaded
    0
    Quote Originally Posted by taff View Post
    thanks mate any ideas as to what the size comparison is between a 200 tdi and a v8 one

    jason
    Sorry, but I guess the V8 one is marginally bigger again. I can measure them if you want. I was going to do roof rack supports too, so I'm glad you are volunteering to be the Lab rat.

  8. #8
    Join Date
    Nov 2006
    Location
    narellan, sydney
    Posts
    1,131
    Total Downloaded
    0
    There are different sizes in different models. older 2nd hand ones were 3 inch or 80mm approx, and the newer ones are 100mm. I'm running twins, 1 is an old 200tdi, the other is a new 300tdi. Doesn't really matter, they still look the same unless you look closely.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!