Thread: Defender Tdi - Putting in a Td5

I am pretty sure you're wrong guys. The TD5 engine loom on a discovery is a seperate entity to the bulkhead loom and BCU etc as it is on a Defnder (albeit with no BCU)

Edited to add it would be easieer with Defender parts but its not that much harder with Discovery.

Throttle is different. Yes

Jock

If you fit a td5, it would be easier to fit all of the drive train
(ie gearbox/tcase etc0 from a D 2, that way it would be less
expensive in the log run.

regards

Seashells

94 Discovery td5

2nd hand TD5 in a TDi...why don't you just give the money to charity..either way you will loose it...

Just because you dont have the imagination or ability to take on or attempt something, doesnt mean you should be a smart **** and spout crap to put someone else off.

Oh and its lose, not loose.

Originally Posted by Slunnie

Personally, Id no be using a Disco TD5 and computers. This setup electronically is a lot more complex with communications with BCUs etc, and I'm pretty sure that the engines ancillaries are setup differently.

If you do the conversion with a wrecked Defender, then you know that everything will fit into the engine bay, the computer and looms will be suitable and the other associated parts like accelerator pedals, radiators etc will suit

x2.

I know of one Sydney workshop that tried to shoehorn a D2 TD5 into a D1. It'd run, but only for a couple of minutes. They missed one sensor up in the headlining or somewhere when srripping the writeoff. They gave up.

If it was relatively easy you'd see conversion kits by now surely?

Regards
Max P

by the sounds of it the computers are the problems.

is it possible to strip a Td5 of the ecu and run it like a Tdi? or is that not possible?

Thanks

Jock

Originally Posted by DirtyDawg

2nd hand TD5 in a TDi...why don't you just give the money to charity..either way you will loose it...

well mate im not sure if u read the first post but either i rebulid the Tdi or find something cheaper all im asking in this thread was if it was possible and worth doin rather than rebuilding the Tdi

i have been told its bloody expensive to rebuild a Tdi thats why

Thanks

Originally Posted by Jock The Rock

by the sounds of it the computers are the problems.

is it possible to strip a Td5 of the ecu and run it like a Tdi? or is that not possible?

Thanks

Jock

No fraid not Jock, the injectors are electronically fired. You may be able to get one to run more simply on say a Motec ecu or similar but it would bump the cost a lot.

Rdgs
Pete.