Got Creative with angle Grinder , ScorpionFlares Finally done.

I did the same thing, I have only just got around to finishing off the inner liners closing up all the gaps !! only a year after fitting them. I also fitted checkerplate to the lower panels ! Came up a treat !

My rear ones also did not line up very well, and as you tighten up the screws the edges around the doors pull over the edge and go out of shape!:twisted: (I put nutsets in the pannels and screwed the flares with small hex head stainless bolts)
I'll attach a pic ! Ive just got to finish off the back checkerplate where it meats the bumper ! and modify the exhaust for a side exit to stop snagging off road.

Cheers
Jeremy

Quote:

---

Originally Posted by Slunnie

Yeah sorry. They are small for loading times and I was too lazy to make each pic link to a full size.

The pics are all available in the gallery and can be clicked on for a larger 640x480 image. Sorry.

http://www.slunnie.com/coppermine/th...s.php?album=21

---

That's great Simon , you really took your time in your Nip-tuck :D and it looks good , I just Marked mine with a Texta and started cutting..:D:D.The Butcher

I certaily cut a bit more off than you did , what size tyres are those ?

Quote:

---

Originally Posted by Jezzaol

I did the same thing, I have only just got around to finishing off the inner liners closing up all the gaps !! only a year after fitting them. I also fitted checkerplate to the lower panels ! Came up a treat !

My rear ones also did not line up very well, and as you tighten up the screws the edges around the doors pull over the edge and go out of shape!:twisted: (I put nutsets in the pannels and screwed the flares with small hex head stainless bolts)
I'll attach a pic ! Ive just got to finish off the back checkerplate where it meats the bumper ! and modify the exhaust for a side exit to stop snagging off road.

Cheers
Jeremy

---

Hi Jeremy ;

Like to see more pics close up , and also of the gap inside the doors to get an idea how I should do mine.

Quote:

---

Originally Posted by V8Landy

Selleys no more gaps:D:D
Looking nice Khossie about time you got off your ring:wasntme:

---

nah , I might use builders Bog:D:D

Quote:

---

Originally Posted by Disco_owner

That's great Simon , you really took your time in your Nip-tuck :D and it looks good , I just Marked mine with a Texta and started cutting..:D:D.The Butcher

I certaily cut a bit more off than you did , what size tyres are those ?

---

I just wanted to not stuff it up and I couldnt find anyone that had cut D2 guards at the time... well, except one fella in the US (Greg Davis) that cut for 37's, but that was a bit different to what I wanted and he had extended the wheelbase to do it. The Disco was worth a bit then also. :lol2:

I think the first rear arch took a whole afternoon. The other side was a lot quicker.

The tyres are 285/75-16 MTR's during the cut, and the flex was done with 34x11.5-16 Simex Jungle Trekker II's

Quote:

---

Originally Posted by Disco_owner

nah , I might use or builders Bog:D:D

---

:Rolling:

You could make it into a nice cornice. :eek:

Quote:

---

Originally Posted by Slunnie

:Rolling:

You could make it into a nice cornice. :eek:

---

:lol:

Plastering 's gonna be a bit tricky thou ,hard to get a trowl in there