Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Block and Tackle recovery

  1. #1
    Join Date
    Mar 2008
    Location
    Townsville
    Posts
    465
    Total Downloaded
    0

    Block and Tackle recovery

    Speaking to a a guy today who swore that the best recovery gear to have was actually a block and tackle and a couple of snatch straps.. Sure enough, in the back of his Pajero was the said block and tackle....He reckoned - along with the tales of remarkable recoveries (which would occur often with a Paj, ) that it was far better than any winch.
    The question is, just how good could it actually be? Sure , it would be slow, but if using a 3 or 4 tonne block and tackle, could it be quite effective? - my reckoning would be that it would be.

  2. #2
    Join Date
    Jan 1970
    Location
    Toowoomba QLD
    Posts
    1,132
    Total Downloaded
    0
    I have used one in a recovery when nothing else was available but found that with the block lying on its side, rather than hanging vertically as they are designed to do, the chains were a pain to pull through and kept jamming and causing frustration......

    Would get you out of trouble but I wouldnt want to do it regularly.

  3. #3
    Join Date
    May 2008
    Location
    QLD - Sunshine Coast
    Posts
    177
    Total Downloaded
    0
    Add mud to the equation........ does not sound good.

  4. #4
    Join Date
    Jan 1970
    Location
    Free Again Thanks Dan
    Posts
    10,150
    Total Downloaded
    0
    Do you mean a chain block which is often mistaken for a block and tackle

  5. #5
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,503
    Total Downloaded
    0
    Ive done it and thats not a block and tackle your describing its a chain block...

    good kit but Id not want to use it again, its great right up untill the reeve chain starts dragging crud into the block.

    a block and tackle uses rope and those I also use but only to provide corrective action on a line or for very light work


    IF youve got to go hand work go a tirfor for recovery.
    Last edited by Blknight.aus; 2nd September 2008 at 09:07 PM. Reason: Im half a sleep I left out some words
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.

  6. #6
    Join Date
    Mar 2008
    Location
    Townsville
    Posts
    465
    Total Downloaded
    0
    Yep, a chain block - like what I've used to pull a motor.
    I would also have thought that once it is laid over, that it would be a right pain to use.

  7. #7
    Join Date
    Jan 1970
    Location
    Yinnar South, Vic
    Posts
    9,943
    Total Downloaded
    0
    Quote Originally Posted by djames View Post
    Yep, a chain block - like what I've used to pull a motor.
    I would also have thought that once it is laid over, that it would be a right pain to use.
    Try and use a chain block sideways, its a fuggin nightmare

    A cumalong maybe, I;ve used them to, but I'll stick with my high mount

  8. #8
    Join Date
    Jan 1970
    Location
    South Yundreup,WA.
    Posts
    7,468
    Total Downloaded
    0
    In the mid 80's that was pretty much all I had. There was not too much easily accessible recovery gear around and even if there was could not afford it.
    Used a chain block plenty of times, then upgraded to a hi lift jack.
    Using a chain block you should have some knowledge of lifting gear and what to look out for. As soon a link mishapes or elongates its past the time to stop.
    Slow but it is effective. Saved me losing my MK Patrol into a dam after a night of shooting.
    2011 Discovery 4 TDV6
    2009 DRZ400E Suzuki
    1956 & 1961 P4 Rover (project)
    1976 SS Torana (project - all cash donations or parts accepted)
    2003 WK Holden Statesman
    Departed
    2000 Defender Extreme: Shrek (but only to son)
    84 RR (Gone) 97 Tdi Disco (Gone)
    98 Ducati 900SS Gone & Missed

    Facta Non Verba

  9. #9
    Join Date
    Jan 1970
    Location
    Moruya Heads/Sth. Coast, NSW
    Posts
    6,532
    Total Downloaded
    0
    Quote Originally Posted by rovercare View Post
    Try and use a chain block sideways, its a fuggin nightmare

    A cumalong maybe, I;ve used them to, but I'll stick with my high mount
    If you lay the returning half of the pulling chain over the top of the pulling chain the chain will not jam, have used a Chain Block horizontally thousands of times in the rigging game, mud would not be good though, Regards Frank.

  10. #10
    JDNSW's Avatar
    JDNSW is offline RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,529
    Total Downloaded
    0
    I do not have a winch - but I do have a lever operated "chain block", which I have used for recovery on a number of occasions. Only problem is the relatively short pull, but it depends on the situation how much of a disadvantage this is. I also use it to strain hinge joint on fences.

    John
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol

Page 1 of 2 12 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!