Thread: Another Isuzu conv query

The old Isuzu engine to LR transmission adaptors. A bit rare. You could try this crowd, although they appear to be into the Jap 4x4 Marks 4wd Adaptors Home Page

It's on the other side of the country but talk to Bruce Davis. There is a 130 TD5 getting around that has had this done.

Plenty of information (not all good) in the Isuzu Landy forums - go to the forums page and scroll down till you see it.

Originally Posted by Bush65

Plenty of information (not all good) in the Isuzu Landy forums - go to the forums page and scroll down till you see it.

Originally Posted by big guy

Guys
A mate and I are doing a transplant.
we have a 89 RRC which used to have a 2.4L Italien diesel in.
We now have a 3.6L Isuzu and need a little help.
Need to source bell housing and adapters etc.

Does anyone have one or know of one or know where and or who can make one.

Its to go up to a LT77, may even consider a LT95 conversion for toughness.

What do you all think?

The 3.6L is the same block as the 4BD1 3.9L. The standard gearboxes behind the Landys fitted with these were Lt95(4 speed) and Lt85(5 speed) Unfortunately, even if you use one of these boxes, the flywheel housing and bellhousing are very hard to find second hand. You can buy them new, but they are far from cheap.
More info in these other threads.......
http://www.aulro.com/afvb/isuzu-land...onversion.html
http://www.aulro.com/afvb/isuzu-land...v-starter.html

Oh, why didn't i think of that.

Thats 1st placed i looked, was just looking at perhaps new places or ideas, most links there are from quite some time ago.

All good, we will work it out, I do realise though that some guys on here are seemingly geniusses. Hence me asking again and cause its a 3.6 not the usual 3.9L donk.

Originally Posted by Bush65

Plenty of information (not all good) in the Isuzu Landy forums - go to the forums page and scroll down till you see it.

Originally Posted by rovercare

The info in the forum is good, I was tired when I wrote that post. I should have written not all good news.

Originally Posted by Bush65

The info in the forum is good, I was tired when I wrote that post. I should have written not all good news.