Originally Posted by
seano87
Engine oil : 15W/40 - I use Penrite HPR and have never had a problem.
Coolant : Used to be 50/50 mix Ethylene Glycol (green) but since head gasket blew it has Organic Acid Technology (OAT) coolant which is red. I'd stick with normal E-Glycol, its more available and can be topped up with water much more happily.
Manual trans, PAS, (or Auto trans) : Penrite Auto trans fluid type D
Transfer box : Hypoid gear oil 80W/90 (I think, not 100% sure)
Front and rear axles : 80W/90 gear oil
Lithium based grease in the grease nipples along the prop shafts etc
Brake and clutch : Dot4 brake fluid, just make sure its from a sealed container. I just replaced all mine since I had no idea when they were last done, very simple job.