congratulations getting into the mag.:twobeers::clap2:
Printable View
congratulations getting into the mag.:twobeers::clap2:
nice work butt. did you buy or make your cage. reason i ask is i've just ordered the metal ready for the cage on my 90 and was after a bit of info on where it ties in
Hi Taff,
It was a combination of both reallly. I bought a Protection and Performance external/Internal cage, but it ddint fit exactly what I wanted. It also didnt come with any mounts (dont ask!)
I ended up getting hold of some CDS cage tubing and making the two extra roof bars (the top ones) and all the associated plates and so on, along with the corresponding turetts on the hoop for them to bolt too.
I also put a second diagnol on the main hoop as it only had 1.
I then made all of the mounts, with the exception of the 2 inside the front wings which I bought off the shelf.
It really was possibly the most time consuming job I have ever done.
The rear mounts, both under the hoop and in the back corners are immensley complicated. The rear most ones, tie into my rear body, x-member end sliders too.
I can try and get some pics if you like?
Rgds
Pete
pete, if you could that'd be great. the front hoop will be the same as the on we made on the county so i won't need anything form there. i'm more interested in where your rear hoop attaches. i don't think i'm going to put any diagonals on that hoop as i'm going to put a 3rd on the back.
thanks jason
Quote:
Originally Posted by Psimpson7
Hi Jason,
Here you go:
Main hoop mount:
https://www.aulro.com/afvb/images/im...012/01/389.jpg
From the front (ish) you can also see here the handy bolt locating bracket just behind it!
https://www.aulro.com/afvb/images/im...012/01/390.jpg
From the rear (ish)
https://www.aulro.com/afvb/images/im...09/02/1277.jpg
You can see that we basically made a tapered block out of 6mm plate that fits tightly between the floor and the top of the cross member. The driver side was harder on the TD5 due to the fuel filter. i did get it all to fit but there was a fiar bit of work involved.
The main hoop, seen here is then bolted into tapped holes in the mount ( I am just thinking we may have used 8mm plate for the top face of the mounts)
https://www.aulro.com/afvb/images/im...09/02/1278.jpg
here's the turrets I made to allow the second pair of roof bars to fit. Made from cds again. You can also just about see the slot we had to cut in the roof rib to allow the side bar turret fit.... I also drilled through the face to get to the now hidden nuts and bolts)
https://www.aulro.com/afvb/images/im...09/04/1432.jpg
Here the corresponding roof bar
https://www.aulro.com/afvb/images/im...011/04/112.jpg
The rear diagonal mounts
https://www.aulro.com/afvb/images/im...012/01/388.jpg
Again made from CDS and 6mm plate. All bolted in to the cross member to and face and tied into the rear body protector.
This is the rear diagnol mount inside the car
https://www.aulro.com/afvb/images/im...09/02/1279.jpg
Before anyone says anything, some of these pics were taken when it was being made, hence no paint.
She's a nice rig mate . Cool pic of it on an angle but some bozo is standing in front of it :p:D;):wasntme: .
Well done mate
I only ever once got my Landy in a magazine, the LRO one and the photo would have made a 50c piece look big :(
BTW what tyres are they? Insa Turbo Special Tracks or are they the Simexs?
Thanks
Thanks Mick.... I know! He wouldn't get out of the way!!:p
Jock,
They are Silverstone Extreme Trekkers. 35x11.5x15
Cheers
Pete
I always liked the look of them :)Quote:
Originally Posted by Psimpson7
One day ....... :(
Thanks mate