Printable View
Not quite sure what you are trying to show there Tombie!
Using your tables the XP smashes the comeup/premier everywhere apart from no load line speed, and current draw (which isnt really that relevant!)
The XP is 15% faster at 9500lb that the CU is at 9000.
Not saying they aren't good, but IME the XP is probably still the best off the shelf low mount winch you can get.
The difference is 1 ruler length per minute at a far lower current draw.
Not to mention price vs value.
As for quality, I can tell you from experience the DV is built better than the XP...
For a tourer the DV is superior in overall aspects.
The XP was a bitter disappointment when I was running it.
The DV (CU) pulls far stronger (maybe not quite as fast) for far longer.
And yes I've done recoveries with both that had batteries at their limits.
What the core of what I'm saying is:
They'll do everything asked at a great price for a long time...
And for a tourer, money is best spent elsewhere.
Yup. First problem is the cut-out for the motor is on the left crush can and needs to be on the right or it will spool off the top.Quote:
Originally Posted by Stuuu
The second problem is the heat sink on the end of the 6hp motor is too big to fit in the cut-out for the smaller motors.
I'll try to post some picture when I finally mount mine. (9.5xp onto an ARB winch bar.)
Waz
No worries - just checking I wasn't guessing.Quote:
Originally Posted by waz
What grade of Plasma rope did you go for?Quote:
Originally Posted by dmdigital