Doing a Shonky...

I seem to recall in the soapbox section, an electrician complaining about getting this sort of enqiry from at least one idiot a week.

SHONKY, Come on down:p:D

People have done it. Worst case scenario, burn down your house. It is up to you.

Tip. Use the closest plug to the meterbox.:(



or





Buy a 10a one or get a 15a cicuit put in you shonky bastard:cool:

CC

I remember the thread Col! :lol2:

Of course, any electrician is going to say "No - you can't do it" but obviously many people get away with it quite okay. :)


I am tending towards not bodging it and just getting a 15A plug put in. The wiring in the house is pretty interesting at any rate!

I dunno if the landlords will mind. They are a bit neurotic. :(

Hey Shonky I've been known to make 15A adapters in the past:angel: but I agree with others don't risk it with rental property even though most have ten double adapters and more than 10A loads on a single power out let:eek:
I'd be surprised if the land lord would not allow you to put an out door weather proof 15A in the garage or shed.

Quote:

---

Originally Posted by Lotz-A-Landies

If you must buy a 15Amp unit and wish to use a 10Amp outlet. Make sure that other heavy current appliances* on the same circuit are turned off and if you know use the one that is closest to the power board. If your power board has circuit breakers they are most likely 25Amps on the power circuits.

---

This is exactly the advice a sparky in Brisbane gave me at the time. He didn't have much of an issue with people doing it, and thought it was fairly risk free if most other things are switched off, and you connect (ideally) to a GPO close to the meter box.

But - a friendly sparky should be able to install one for you cheaply. A GPO is $5-10, the wire will be cheap if the run from the meter box is short. That just leaves labour.

Mate,, just grind the earth tang down,,,,,

Pedro.....the electricians best friend:D

Quote:

---

Originally Posted by numpty

Pedro.....the electricians best friend:D

---

:Rolling::Rolling::Rolling:
Classic example, if you've got nothing good to say, say nothing..:D

Quote:

---

Originally Posted by Hoodoo Brown

The 15A circuit should be wired (as per AS 3000) with larger wire diameter between the power point and the fuse box.it is capable of handling more load(current in amps)

A 10A domestic circuit is designed to hold 10 Amps not 15A.Extending this with a short lead with a 15A capability does not protect the rest of the wiring (in the roof etc.)

Current inrush on startup of the compressor will be high thus a 15A requirement.

Settle for the 10A version and don't risk it as it may void house damage insurance.If you dont like it continue to search for a twin cylinder 10A unit.

---

Actually, the wire is the SAME size, 2.5mmsq, its just its a dedicated cct for 15A;)

Just make a 10A-15A short lead and make sure nothing else of large consumption is running on the same cct at the same time, the wiring is the same size regardless and the protection "should" protect the wiring in the house regardless..........Not that I've ver done it before:D

And I iz a Lektrishan:eek:

Quote:

---

Originally Posted by V8Ian

:Rolling::Rolling::Rolling:
Classic example, if you've got nothing good to say, say nothing..:D

---

:eek::eek: Maybe I'm missing something.....but I was referring to Pedro's almost invisible post.