Results 1 to 5 of 5

Thread: Canvas Canopy

  1. #1
    Join Date
    Jul 2008
    Posts
    100
    Total Downloaded
    0

    Canvas Canopy

    G'day fella's.

    I have welded up a frame for the 130 and now need a motor trimmer to make the cavas cover. It is going to be a basic canopy. No flash awnings here. I am in Brisbane. Also what grade of canvas should I be looking at. The cover is going to left on the truck most of the time.

    I am sure many been down this route before any advice would be appreciated.

    Thanks.

  2. #2
    Join Date
    Jan 1970
    Location
    NSW far north coast
    Posts
    17,285
    Total Downloaded
    0
    A motor trimmer suggested to me recently that PVC was the material of choice if the truck is for commercial use, and canvas if for camping.
    The PVC wears/lasts/cleans better apparently, but obviously doesn't breathe.

  3. #3
    Join Date
    Jan 1970
    Location
    Shepparton
    Posts
    1,764
    Total Downloaded
    0
    May be worth while to check out prices from a tent / canvas repair business.

  4. #4
    Join Date
    Jan 1970
    Location
    TOWNSVILLE
    Posts
    428
    Total Downloaded
    0
    You could try a Sail Maker (yacht), they do more than just sails.

    Regards,
    PeterW

  5. #5
    Join Date
    Jul 2007
    Location
    Auckland, NZ
    Posts
    2,278
    Total Downloaded
    0
    This might be useful to decide on what else you might want with it and why.

    [ame="http://www.youtube.com/watch?v=oKPHlpxbcOs"]YouTube - 4wd Soft Tops[/ame]

    Alan
    Alan
    2005 Disco 2 HSE
    1983 Series III Stage 1 V8

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!