Thanks!
TR Spares said between $1700-$1900 depending on condition. So they're the cheapest so far...what are they like quality and service wise?
I tried googling LVS Penrith but no luck. Do they have a website or phone number?
Printable View
As already mentioned the only thing that will kill a transfer case is not having it locked and giving it a hard time.
I would get it rebuild if it was mine...
I know people who have picked up good SH LT230s for as low as $800. But I think disco versions are cheaper???
Also, it would be a good idea to buy and fit an upgraded cross shaft from Jacmac.
Overhaul kit for bearings seals and gaskets is $400 and the spider gears and cross shafts for the diff should be a bit less than that. If the diff housing is not damaged where the cross shafts are clamped that is all that is required.
Rebuild in accordance with manual. If you do not want to rebuild it yourself there is a shop in archerfield that does it for a very reasonable price. Will have to dig out number if interested.
Hey throwing another spanner in the works...I just saw a LT230 1.22 for sale on Ebay on the Sunshine Coast at a very good price - my old one is 1.410 and I'm running 235/85/R16's. Do you think the 15% difference in gearing is going to make my 200Tdi too sluggish?
You have a set of the 1.41:1 gears sitting on you bench if you want to go back from 1.22:1
Have'nt you heard of Ebay??
21 hours to go & looks OK. And its in the Sunshine Coast..
Landrover LT230 Transfer Case 1.22 Ratio - eBay Other Transmission, Transmission, Car Parts, Accessories, Cars, Bikes, Boats. (end time 10-Aug-09 13:05:17 AEST)
Or go mad.
SER2 LAND ROVER DISCO TRANSFER CASE - eBay Other Transmission, Transmission, Car Parts, Accessories, Cars, Bikes, Boats. (end time 14-Aug-09 15:06:52 AEST)
That would be ideal, only problem is two of the gears have been damaged chewing bits of teeth from the diff. :(
Yeah I have heard of Ebay. Used it a bit too. ;) That's actually the one I was referring to in my previous post - trying to figure out if a 1.22:1 ratio will be workable with a 200Tdi... Thanks for taking the time to have a look though!