-
22nd August 2009, 12:26 PM
#1
Faulty front wheel sensor on TD5 2001
I have a TD5 2001 and I have just replaced a right front sensor that was showing TC ABS lights on the dash and showing faults on the computer when checked.
The lights still occur on the sash.
Computer check still says faults.
What now.
Any ideas.
-
22nd August 2009, 12:33 PM
#2
Have you checked the harness continuity?
Scott
-
22nd August 2009, 03:03 PM
#3
Welcome to the world of the 3 amigos!
Do a search and you'll find plenty there.
Did you actually clear the fault after you replaced the sensor? I know that sounds silly but it will keep doing it if you don't use nanocom or similar to clear the fault.
That said, I clear mine regularly and there is nothing wrong with the wheel sensors, brake pads, abs module, shuttle switch or whatever the hell else makes them light up. you just learn to live with them after a while.
D4 SDV6, a blank canvas
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Search AULRO.com ONLY!
|
Search All the Web!
|
Bookmarks