Thread: Steel offcut 75x75 shs needed.

Pretty certain I have, but a bit far away!

John

Originally Posted by Psimpson7

Bit of a random one but does anyone have an offcut of 75 x 75 x 5 or 6 SHS lying about that they want to part with, for cash / beer etc?

I only need about 150mm in total.

I will try the local stockholders during the week but doubt they will have a short section.

Hope this thread is ok in General chat.

Rgds
Pete

fair chance i would have some at work.......bit far away as well

Cheers guys, Wonder how much postage would be!!

Weeds you're not too far away. I could drive up to brissie if you did have a piece?

Postage should be pretty cheap.
Trick is to use those express post plastic bags,cheaper than a wraped parcel.
Andrew

I have a full length as well some short peices as well but its in Galv if that what u need, its 75x75x5 wall thickness, you are welcome to what you want no need for anythink...

Ashley

I would have thought that your local MetalCorp or Onesteel would have an offcut. You can buy sections of a length from these shops which leaves them with the offcuts. They usually just sell off the offcuts as a cheap pallet load.

I think we have some with around about a 7mm wall thickness

I would have some Pete, could bring it to the next meeting if you can wait that long.

Cheers, Mick.