32" tyres - Opinions please

Quote:

---

Originally Posted by bacicat2000

I think you may have answered your own question. 44PSI too hard, 36 is better - you will be cloes to the mark with that I would say. Somewhere between 35 and 40 would be fine I think.

Got any pics of how they look?:)

Cheers - Gav

---

I was hoping that someone could offer some advice on how low they go... It's still pretty rough. Do you think I'd run into trouble with uneven wear if I go to say 30?

and pics.

[URL="http://i1295.photobucket.com/albums/b640/debruiser/P9290088_zps2b864764.jpg"]https://www.aulro.com/afvb/images/im...12/10/1236.jpg

[URL="http://i1295.photobucket.com/albums/b640/debruiser/PA070003_zps800682b7.jpg"]https://www.aulro.com/afvb/images/im...12/10/1238.jpg

Without flares - i think looks way better.
https://www.aulro.com/afvb/images/im...12/10/1239.jpg

I'll try those again...

with flares
[URL="http://i1295.photobucket.com/albums/b640/debruiser/P9290088_zps2b864764.jpg"]https://www.aulro.com/afvb/images/im...12/10/1236.jpg

https://www.aulro.com/afvb/images/im...12/10/1237.jpg

30PSI sounds a little on the low side to me. Personally, I wouldn't go below 35, but I do tend to run pressures a bit higher than factory recommendations. I run 30 to 32 in the Vectra, and 34 in the Commodore - that now has 90KKM on it on the original tyres, 40 in the Classic Rangie, and 42 in the L322. You do compromise the ride a bit, which in a Series vehicle would be even more exagerated I would think.

Tried 30psi in the rear and 34 in the front yesterday. Took the jar out of the bumps so I think I'll stick with that for a while and see how the tyre wear goes.

I run 40psi in the Ranger - that gets pretty good wear from tyres and it's not too rough but there again it's got tortion bars on the front and leaves on the back.