Pre sand driving preparations for the D3

It warns at 40, actually lowers at 50. And 50 is pretty quick, should be able to make most dunes at that speed. Not that I'm condoning the 50-lower limit as that is too low for general sand driving and various other situations.

Quote:

---

Originally Posted by RichardK

You can overcome this problem in one of two ways; use a set of sensor link rods set to tell the height sensors 25 or 50mm height above normal is "Normal" or use a Blackbox solutions Faultmate MSV to change the suspension calibration to 25mm higher as "Normal"

---

Or you can fit my electronic controller to adjust normal height +30mm or +50mm when required.

Hi Graeme,
I think that you need to add to your signature. ;)

Best Wishes,
Peter