Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17

Thread: D4 Squeaking Mirrors

  1. #11
    Join Date
    Oct 2006
    Location
    NSW Riverina
    Posts
    299
    Total Downloaded
    0
    They need an access point to spray like a grease nipple or something. My FL2 did the same. I just sprayed my D4 with WD.

  2. #12
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,034
    Total Downloaded
    0
    My dealer sprayed heaps of some sort of oily stuff into mine for the squeaking - the oil is still finding its way onto the door panels months after! I disabled the auto folding prior to treatment but when folded a couple of days ago they didn't squeak and still folded properly. I wonder though whether there is now dirt stuck everywhere inside the covers. I agree that a proper lubrication point is required.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa

  3. #13
    SBD4's Avatar
    SBD4 is offline A Keeper of the TGO Gold Subscriber
    Join Date
    Dec 2011
    Location
    Bundeena
    Posts
    2,809
    Total Downloaded
    0
    Quote Originally Posted by Robocop View Post
    They need an access point to spray like a grease nipple or something. My FL2 did the same. I just sprayed my D4 with WD.
    Yes, It would be good if they provided something simple like that. Although very tempting, I'm not keen to randomly spray in there in the hope I might get the bit that's causing the noise.

    Quote Originally Posted by Graeme View Post
    My dealer sprayed heaps of some sort of oily stuff into mine for the squeaking - the oil is still finding its way onto the door panels months after! I disabled the auto folding prior to treatment but when folded a couple of days ago they didn't squeak and still folded properly. I wonder though whether there is now dirt stuck everywhere inside the covers. I agree that a proper lubrication point is required.
    That's exactly what I would want to avoid - they fix one problem but cause another! I will ask the dealer to sort it out at my next service in a couple of weeks in Celtoid fashion.
    Cheers,

    Sean

    “Only two things are infinite, the universe and human stupidity, and I'm not sure about the former.” - Albert Einstein

  4. #14
    Join Date
    Dec 2009
    Location
    SW WA
    Posts
    345
    Total Downloaded
    0
    I've found giving them a good blast with the garden hose while they are in motion fixes them up pretty well.

  5. #15
    Join Date
    May 2010
    Location
    Brisbane, QLD, Australia
    Posts
    2,252
    Total Downloaded
    0
    Hi All,

    Since talking to LR after my squeaking/shuddering experiences, I've felt confident to just spray WD40 or equivilent into the joint, front and back & then I move the mirrors. I do this just before I wash the car. Have had no issues at all.

    I accidently, broke a mirror recently and although was peaved that it had happened, got a good look inside the assembly....there isn't much to it! Demist wires, a motor assembly and a lot of empty space.

    Of course I know nothing and am hoping that the WD40 is sufficient and does no harm.....it's got to be better than the mud , salt and sand that I've subjected it to....

    Kev.

  6. #16
    Join Date
    Jan 2012
    Location
    Sydney
    Posts
    49
    Total Downloaded
    0
    WD40 isn't actually a lubricant it will penetrate the mechanism and lubricate for a short period of time but it is too thin and will quickly run off and desolve actually degreaseing the mirror mechanisim so will come back worse. You'd be better using a silicon or white lithium grease. You'll find these at bunnings or a boat shop. The ones from bunnings are actually made by the WD40 company so you can see they aren't the same thing....

  7. #17
    Join Date
    Feb 2010
    Location
    Mount Martha
    Posts
    1,399
    Total Downloaded
    0
    I use a product in a spray can, from my local boat dealer made by Honda.
    It's called Honda Multi-purpose Lanolin Liquid.
    According to the can, it : -
    • Penetrates & lubricates.
    • Corrosion protection - remains pro-active.
    • Non toxic.
    • Resistant to moisture, salt mineral acids and sulphur compounds.
    Works for me.

    Cheers, Craig

Page 2 of 2 FirstFirst 12

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!