Raising D3 driver's seat...

Quote:

---

Originally Posted by CaverD3

Known issue.
Two causes:

1. Lard Arse pushing the adjuster down when getting in.

2. Faulty mechanism.

Place a large amount of weight on the seat overnight and see if it sinks, if it does you will need a a new mechanism or do this:

DISCO3.CO.UK - View topic - FILO's sinking seat remedy with pics

---

Gday...

Fairly confident the problem is causal symptom numerated as 1 above.

However, not so much my Lard Arse but my height-challenged pins to raise the Lard Arse sufficiently high enough to not interact with the adjuster lever.
Can reduce the size of Lard Arse (with considerable effort) but have never been able to overcome the height-challenged pins. :D
Thanks all
Cheers
John

Quote:

---

Originally Posted by Rockylizard

but have never been able to overcome the height-challenged pins.

---

You could try what Hajnal Ban did. $40,000 surgery to have her leg strched by 8cm.
Hajnal Ban, of Logan council, defends surgery to lengthen legs

Gday...

Hmmmm ......... we seem to have got off topic a little :)

But ... I understand that anatomically, the length of the legs relate to the length of other appendages .... so if I get me legs lengthened, would that lengthen the other appendage ? ? :angel:

Cheers
John

Quote:

---

Originally Posted by Rockylizard

so if I get me legs lengthened, would that lengthen the other appendage ? ? :angel:

Cheers
John

---

It would look even smaller :wasntme:

Quote:

---

Originally Posted by Rockylizard

Gday...
Each morning when I start it up ... I usually have to pull on the lever 2 or 3 times to get it back to the height I had it the day before. We are travelling full time and it does not seem to go down for the day's driving.

---

G'day John,

My D3 has exactly the same issue. I thought it was something I was doing, but every time you get back in car it needs re-adjusting. It keeps the height fine when driving. I might get LR to check it out when she goes for next service in November. On another similar line, has anyone heard of or been able to modify the seats so they can go back further?....I only need another inch and that would be great.
Cheers Neil.