Here's my 2008 D3 TDV6 SE. Few changes including Opposite Lock bullbar, Warn XD winch, Safari Snorkel, Compomotive 18" with Cooper 285 60, rear carrier, ECU lift
Attachment 138557Attachment 138558
Printable View
Here's my 2008 D3 TDV6 SE. Few changes including Opposite Lock bullbar, Warn XD winch, Safari Snorkel, Compomotive 18" with Cooper 285 60, rear carrier, ECU lift
Attachment 138557Attachment 138558
I’ve brought shame on the group.. I got bogged last weekend in hawks nest NSW and needed a land cruiser to pull me out. It’s well known to me to be very soft sand there, we got around all over the place for a couple of days and then this one spot we just sunk with no hope of getting out. Tyres at 14 PSI and suspension to extended height.
The first cruiser got stuck as well but eventually brought out by the second one in the background.
Oh the shame.
Attachment 138623
I got the defender bogged in the same spot! Was fine everywhere else and thought "i'll just have a quick look on this beach" and got bogged. The hilux that tried to pull me out also got bogged. Got myself out with the tracks though. Yet to try the D3 on the beach.Quote:
Originally Posted by Lukeis
What tyre pressures and tyre specs on the Deefer ? Cheers
does the ol bullbar include the front parking sensors? Looks great.Quote:
Originally Posted by CanadianRyan
Brendan, those tail lights look terrific! Where did you get them?Quote:
Originally Posted by Brenden73
- Andrew
I fitted my nudge bar last week, and this weekend, the driving lights went on, along with 2 black Anderson plugs.
The driver side plug goes to the aux batt and can be used to plug in my ARB compressor (or sanything else). I can also plug in my solar panels to charge the battery as well. It is a Traxide system, so it looks after itself.
The Passenger side plug goes direct to the main starter battery and can either power something, or have a solar panel hooked up to it.
Both are protected by 40 amp fuses.
Attachment 139423Attachment 139422
With the rash of people mounting their Engels between the 2 rear seats, I decided to join the club today.
Remove six T45 bolts to remove the (heavy) center seat.
Replace 2 of then (the middle ones, and you don't want dust or water coming in the holes.
Fit 4 x M10 tie down rings (from Bunnings at about $3 each) into the 4 remaining holes.
Fit fridge, and tie it down.
All in all, less than an hour to do.
The fridge acts as an armrest for anyone in the back.
Attachment 139424
Even with the rear seat backs down, they are not too high compared to the fridge, and it opens up the whole rear area for more "stuff"!
Attachment 139425
All I have in the back now is my Thumper aux battery.
Quote:
Originally Posted by Aussie Jeepster
Good idea having power input and output so conveniently located.
Is that a ECB 63mm nudge bar?
Hi Andrew,Quote:
Originally Posted by ndrew
I found them on Ebay and loved them, funny thing was I didn't even own a Disco3 when I made the purchase [emoji6]
