Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: D4 steering wheel gearshift switches

  1. #1
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,030
    Total Downloaded
    0

    D4 steering wheel gearshift switches

    I finally fitted switches to the steering wheel to provide gear upshifts and downshifts, having obtained the equipment 14 months ago for the large outlay of $36. The switches are in a remote control for a set of 4 relays, 2 of which are now connected to the upshift and downshift wires going to the gearbox as they pass through the 2nd battery box. I could have mounted the remote inside the wheel if there was somewhere to mount 2 momentary switches but it was too simple and tempting to stick the remote onto the side of the wheel below the phone buttons, which also meant no modifications to the wheel.



    I regularly want the gbox to shift up a gear but having to go into sport mode often causes an immediate downshift. I also often forget to get out of manual mode, only realising its still there when the gbox doesn't change up normally.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa

  2. #2
    Join Date
    Jan 1970
    Location
    Canberra
    Posts
    18,616
    Total Downloaded
    0
    Your car needs a clean .

    Garry
    REMLR 243

    2007 Range Rover Sport TDV6
    1977 FC 101
    1976 Jaguar XJ12C
    1973 Haflinger AP700
    1971 Jaguar V12 E-Type Series 3 Roadster
    1957 Series 1 88"
    1957 Series 1 88" Station Wagon

  3. #3
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,030
    Total Downloaded
    0
    You haven't seen the outside...
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa

  4. #4
    Join Date
    Dec 2010
    Location
    Melbourne
    Posts
    291
    Total Downloaded
    0
    Hi Graeme.

    Is there any delay when you shift up or down? Are you happy with the results?

  5. #5
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,030
    Total Downloaded
    0
    There is no effective delay. The moment I've released the button, the instrument panel is showing 'command-shift selected' or similar and the next gear shows after the D with the gear change following soon after. Normal command-shift mode rules apply, such as if the speed is too low then the gear number reverts to the current gear and no change occurs. I don't yet know if it will automatically up-shift earlier than in sport mode but I'll find out tomorrow - I'd prefer it did.

    I've only been out on the road for a short run and noticed that once command-shift mode is entered, it may be necessary to keep changing up manually because the TCM stays in command-shift mode for some time. This may be good in some circumstances and not so good in others, but at least full auto mode doesn't resume prematurely which might otherwise cause an undesired down-shift.

    Command-shift mode can be cancelled by moving the lever to sport mode momentarily and as its already in command-shift mode, there is no automatic down-shift. I could set another button to activate sport mode momentarily to cancel command-shift mode if it becomes a problem but I suspect that once in command shift mode I expect to want to stay there until in 6th gear.

    Down-shift works well too, having tested it on throttle over-run down a steep hill in 3rd then dropped it to 2nd then 1st.

    Yes, I'm very pleased with the facility.

    Edit: The idea came from Pete Bell of Bell Autos UK but finding the right connector and wires in the aux battery spot was my doing.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa

  6. #6
    Join Date
    May 2010
    Location
    Singleton NSW
    Posts
    293
    Total Downloaded
    0
    Well done! Very clever!
    I don't need or desire such a modification, but I appreciate your ingenuity!
    It also looks very 'factory'. And $36! I wonder what L/R would have charged for such an option....

  7. #7
    Join Date
    Aug 2010
    Location
    Sydney
    Posts
    1,874
    Total Downloaded
    0
    I can see the advantage for Low range 4wding.
    Great to be able to select 1st low for a steep decent or maybe 2nd low for a steep climb.

  8. #8
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,030
    Total Downloaded
    0
    I think in low range I'd use manual mode and the lever, as whilst the remote is easy to access when driving straight ahead, it gets hard to find and use with the steering turned. That's where my setup isn't nearly as good as paddle switches (as found on the RRS these days) but even those might be less convenient than the lever. Also, eventually (for most gears - not 2nd when stopped at traffic lights!) the box reverts to full auto which might not be what's required.

    The steering wheel and paddle switch cable from a 2010 RRS can be fitted to a D4 (some used ones are available ex UK because people fit heated ones instead) which then only requires enabling with Faultmate etc, but they're way too expensive for me. The remote control facility works with D3s and D4s.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa

  9. #9
    Join Date
    Mar 2008
    Location
    Sydney, Australia
    Posts
    2,351
    Total Downloaded
    0
    Great job Graeme

    Where they are positioned looks good and in a goood spot.

  10. #10
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,030
    Total Downloaded
    0
    The only disadvantage is that if the gbox is still in command-shift mode when the vehicle stops (eg at traffic lights or a roundabout), it stays in 2nd and needs to either have command-shift mode cancelled or driven manually at least into 3rd. I intend connecting a 3rd button to ground the sport mode signal wire, which when released, instantly cancels command-shift mode, to avoid having to find the gear lever then move it left then right.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa

Page 1 of 2 12 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!