Page 6 of 8 FirstFirst ... 45678 LastLast
Results 51 to 60 of 77

Thread: D4 Dies after first service....VERY unhappy camper!

  1. #51
    Join Date
    Mar 2008
    Posts
    174
    Total Downloaded
    0
    What a great thread...

    Rob I hope they sort this seriousness out with your D4. These forums the world over sadly have the ability to self degenerate and it's not just the Landy ones... always the ones with humans involved. Personally I picked up the vibe/tone of the original post and was saddened to see the troll type comments come through and seriously hope the fix your D4 properly enough to give you full confidence which is always a difficult thing to reclaim once you know it's been pulled to bits.

    I worked a lot at Sale and know how reliable your D4 is going to need to be on the long road out there so I sincerely hope this works out properly for you. Not game to ask which dealer you were using but presume a city based one....

    Best cheers.

  2. #52
    Join Date
    Dec 2009
    Location
    Ranelagh, Tasmania
    Posts
    1,543
    Total Downloaded
    0
    Quote Originally Posted by Geedublya View Post
    Sounds like it was overfilled with oil at the service.

    Looks like my over the internet diagnosis was correct. Pity the Tech/mech who worked on it wasn't more careful/thorough but it happens.

  3. #53
    Join Date
    May 2010
    Location
    Brisbane, QLD, Australia
    Posts
    2,252
    Total Downloaded
    0
    Quote Originally Posted by ozscott View Post
    Kev it was limp home, excess smoke and blown turbos - all turbo issues it seems - that I was referring to. More cases than just on this forum.

    Good to see this thread pick up.

    Cheers
    Hey mate, they are actually two different things. Limp Home Mode is a self protection system that could occur with just about any major failure. It's designed to stop further damage being caused. So it's a design feature not a failure. However, there appears to be a few cases with the D4 where the protection system has been the problem...as in the software flagged a fault that wasn't there. I presume these will get sorted.

    The turbo issues have been well documented and covered in numerous places including this forum.....including my own requirement to have a turbo replaced . There have been various manifestations of the problem...as you stated, blowing smoke and running rough, through to no obvious symptoms at all (like mine....just a miniscule external leak)...I can't remember reading about any causing Limp Mode....but it's highly likely that the failsafe could get triggered.

    As to how many there will be.....I guess as many as there were crap turbo's fitted. There could be thousands....but it's all the same fault.

    Do you see what I mean?

    It sux that this has happened but it's not right to brand a model or engine as being lame when one faulty part has been fitted to one specific built. At this stage, it seems like it's only been the 2009 built. Fingers crossed.

    Cheers,

    Kev.

  4. #54
    Join Date
    Jul 2006
    Location
    Toowoomba, Queensland
    Posts
    1,863
    Total Downloaded
    0
    As others have mentioned, I would be deeply suspicious that the "error" in the oil sensor was that it read overfull when the mechanic knew it was fine. Particularly as no error was reported prior to the service...

    Lucky (or good design???) that it wasn't worse. And I concur that the dealer and LR need to be held to account for damage that may present in the future. Good luck, and thanks for getting back to us.

    Quite a few around here have been psychologically wounded by Toyota drivers and the mere suggestion that someone would leave their self-destructing Land Rover and return to an experience of problem-free Toyota motoring stings. Although many of them would only buy old Land Rovers with no electronics at all. I dare say one reason Defender's don't have headlight relays is that Defender owners are suspicious of even that degree of technology.

    Mind you the other reason given for sticking with older models is being able to avoid LR dealers...

    PS Do check my sig before flaming
    Steve

    2003 Discovery 2a
    In better care:
    1992 Defender
    1963 Series IIa Ambulance
    1977 Series III Ex-Army
    1988 County V8
    1981 V8 Series 3 "Stage 1"
    REMLR No. 215

  5. #55
    Join Date
    Oct 2007
    Location
    Brisbane West
    Posts
    7,372
    Total Downloaded
    0
    Cheers Kev. I WANT LR to sort out the turbo issue - the D4 TT is so close to being the duck's nuts (setting aside tyres which has been gone into many times - for many its not a problem of course). They are miles ahead in tech and design compared to other manufacturers, its just tidying up some lose ends now, hopefully.

    Cheers

  6. #56
    Ean Austral Guest
    And a $10 dipstick would've picked up the problem before the car even got started..


    Cheers Ean

  7. #57
    Join Date
    May 2007
    Location
    Safety Bay
    Posts
    8,041
    Total Downloaded
    0
    Having worked in mechanic shops for many years I'll disagree with a dipstick not letting it happen.If I had a dollar for every time a componant with a full mark,dipstick,sight glass was overfilled or not filled at all my puma would be painted in gold. Pat

  8. #58
    Ean Austral Guest
    Quote Originally Posted by PAT303 View Post
    Having worked in mechanic shops for many years I'll disagree with a dipstick not letting it happen.If I had a dollar for every time a componant with a full mark,dipstick,sight glass was overfilled or not filled at all my puma would be painted in gold. Pat

    I would bet the times that an engine was filled or checked and found to be correct level would far outweigh the times they got it wrong..

    Personally I would take an engine with a dipstick every time.

    You cant put a number to the lack of human attention factor.


    Cheers Ean

  9. #59
    Join Date
    Dec 2009
    Location
    SW WA
    Posts
    345
    Total Downloaded
    0
    maybe.... If the electronic sensor was programed to prevent starting in the first place... the scales would be balanced.. between human error and electronic wizadry.

    I would prefer a dip stick to the current system, but wouldn't have your D3 with a dip stick over my D4 3.0 without one.... in a fit.

    And if you had one, you put up with not having the dip stick too, like the rest of the happy owners.

    PS my first one didn't have a dip stick either, and I still bought another D4 3.0

  10. #60
    Ean Austral Guest
    Quote Originally Posted by kenl View Post
    maybe.... If the electronic sensor was programed to prevent starting in the first place... the scales would be balanced.. between human error and electronic wizadry.

    I would prefer a dip stick to the current system, but wouldn't have your D3 with a dip stick over my D4 3.0 without one.... in a fit.

    And if you had one, you put up with not having the dip stick too, like the rest of the happy owners.

    PS my first one didn't have a dip stick either, and I still bought another D4 3.0
    Fair Call, and you may be right

    PS After trying to get a V12 Cat engine to start in the middle of the ocean due to a failed oil level sender,. and the computer not allowing it to start, and not having the override software onboard, believe me its not something you would want on your D4..

    Cheers Ean

Page 6 of 8 FirstFirst ... 45678 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!