$3500 for a pair of spotties What The ?????

Quote:

---

Originally Posted by R2D2

I dont know why but most trucks that go through my work are fitted with Lightforce lights.
IMO they are not worth the money. The mount in particular i believe is not strong enough and the UV degradation on the housings after a few years is not to good.
I have a set of FYRLYT's and couldnt be happier. To me they are almost indestructable and by far the best light i have used in 20+ years.I have them set in a crossed pattern that appears to yield the best result for me.
From memory, if you use a 24v inverter you can run a higher wattage globe for better performance.(looking into this after my tax is done)
HID are a PITA as you are blinded by the oncoming signs because of the "whiteness" of the light and cant see **** when you dip them for oncoming vehicles.
I much prefer the "light" from the Fyrlyt's.
As for the cooling issue, i am fabbing up an Arab style mesh grille this weekend before i put my CAC back in and my bullbar back on. Not because of the lights but because i think it just runs a bit on the hot side in even stock trim without them.

Just my 2c

R2

---

FYRLYT no longer require the 12/24volt converter. If you have a pair of the original 100watt 12 volt halogens just go to your FYRLYT dealer and get the new OSRAM / FYRLYT 12 volt x 150watt x 5000 Lumen globes and swap them over.
They have the same focal point.

Hope this helps

So whats RRP on the Fyrlyts?

R2, pics of the grille?

Quote:

---

Originally Posted by clubagreenie

So whats RRP on the Fyrlyts?

R2, pics of the grille?

---

I found this - $594 for one:

FYRLYT Genuine 5000 Lumen Driving Lights 3 Light Sets in 1

Edit: just saw Tombies post in general section - he says they're ~$600 a pair. Much better.

I love my FYRLYTs...

https://www.aulro.com/afvb/images/im...12/08/1558.jpg

https://www.aulro.com/afvb/images/im...12/08/1559.jpg

I imagine the best benefit is noone has heard of FYRLYT yet, so they don't get knocked off like Lightforce spotties do.

Are they securly mounted in any case?

Thats my only dislike of the Xrox bar, the lights hang upside down so evben if they are security nuts you still have good access to them to remove with other devices. Might be a nut/loctite/punch/weld job with alarm/30,000v connection.

Try this: Insight Security - Search Shop

Search fo NoGo

[ame=http://www.youtube.com/watch?v=IOFKgFJyWXU]nogo anti tamper bolt head protector.mpg - YouTube[/ame]

Or...

ArmaCap Security Bolt Cap for M10 Bolt

Notice they don't mention how to remove...

Those are not supposed to be removed. They are for anti-vandal purposes with public fixings (gates, poles, parking meters, etc).

Quote:

---

Originally Posted by clubagreenie

Notice they don't mention how to remove...

---

Easy enough, if you have the tools, time and opportunity...