Thanks Andy, might have to give Rhino a call as that wasn't advised when I ordered them (pick up next week) if that's the case might have to change.
Cheers
Julian
Printable View
Thanks Andy, might have to give Rhino a call as that wasn't advised when I ordered them (pick up next week) if that's the case might have to change.
Cheers
Julian
Just picked the car up after getting a few more mods added
Rock sliders
Dual battery system
Bash plates
Light force lights wired up (****s me there is no spots to fit switches)
Picked up the 12000lb winch (warrior brand) with dyneema rope-will fit once the ARB bar is on
Rear wheel carrier with Narva camp light
Whilst she was in Peninsula Rangie Damien noticed I needed Lower Control Arms as well, so the budget has been blown out a bit but I would rather make sure it's all good.
I'll post some photos over the weekend, next week she is off to ARB to get some more goodies and a catch up with DiscoJools to swap my Goodyear Wranglers for his General Grabbers
As Promised the photos:
The RWC is from 4x4 design, I chose this unit as it also allows for the addition to become a Dual RWC which is in my plans, and also incorporated a Light stand, have found it to be of a good quality, however the latch needs a good hit to close. Here is the link to the webite 4x4 Design and Engineering - Home
Attachment 50272
Attachment 50273
The Camp Light is a Narva LED Flood Lamp checked it out last night and I'm really happy with the output
Attachment 50274
And the rock sliders, these are awesome I love how they are thick as some can quite thin. I'll have to find out where Damien sourced these from as when I initially had a chat too him he knew exactly what I was after.
Attachment 50276
Attachment 50277
Attachment 50278'
I feel this will be the one mod that will tell everyone that this is no Toorak Tractor, I'm not designing it to be an extreme machine more of a tourer but you still want it to look like it could [wink11]
I fitted the same carrier, I think you will find it catches well once you have the weight of the spare on there.Quote:
Originally Posted by DoctorJ
It also works well as a ladder to gain access to a roof basket, you step on the centre of the wheel bar and then on the top of the tyre. ( Carrier closed at the time)
Only issue I have is with the rear park sensors, sometimes they work but mostly not!
Next came the Redarc Dual Battery system with a Optima D34 Yellowtop, this could be the mod I might enjoy the most as I've never had a dual battery system before and to be able to sit in one place without the worry of not being able to start the car sounds good to me![smilebigeye]
Attachment 50284
Attachment 50285
I've also added a transmission bash plate for some extra protection with a compressor bash plate still to come
Attachment 50286
Off to ARB tomorrow to get some more goodies added so I'll add some more photos when I get it back.
Cheers
Julian
Thanks Rich its good to hear someone else is happy with theirs, Re: the parking sensors Michael at 4x4 design claims you can rectify the issue with the sensors and the RWC so I plan on having a chat with him once i get it back from ARB because they drive me mad ATM:mad:Quote:
Originally Posted by ~Rich~
Cheers
Julian
How far back did you cut the original black strip?Quote:
Originally Posted by DoctorJ
G'day Tombie, measuring from the rear of the plastic strip 1525mm, its all in the thread i startedQuote:
Originally Posted by Tombie
http://www.aulro.com/afvb/d3-d4-rrs/...-rails-d3.html
Glad I could help
Cheers
Julian
Thanks mate.... Appreciated.... Had been told, but easier to see :DQuote:
Originally Posted by DoctorJ
