Thread: D3 suspension error

My D3 is also showing the same warning. It occurs randomly when driving. I have noticed some noise when the warning appears. Could this be a sensor or something else?

latestest update. The fault is still there.

We were in a shopping centre car park a few days back. Lowered the car to access height (after shutting D3 down then restarting) as the car park was quite low.

Parked then the fault appeared and raised the car to normal height from access height.

I am again thinking it is sensor or a sensor connector fault, not compressor.

some pics of the fault as seen on dash display . . .

DSC related? Are all your tyre pressures even - that would be a simple first check? If you have the 4WD info screen, a faulty height sensor might show up (as a red line above one of the wheels) if the car thinks one wheel is out of range.

Probably need to get the codes read to make an accurate diagnosis.

Cheers,

Gordon

not sure about DSC, there are no faults coming up. I do have to put it in for a service at MR in a couple of weeks so will try and get codes read then.

Will have a look at 4WD screen and see what it reads next time it faults.

ta

I get the same message on my D3. I had an Indie check the codes and it looks like the compressor is on the way out. He cleared the code and I haven't seen the error again. Its been a couple of days now.

Originally Posted by PeterOZ

not sure about DSC, there are no faults coming up. I do have to put it in for a service at MR in a couple of weeks so will try and get codes read then.

Will have a look at 4WD screen and see what it reads next time it faults.

ta

Hi PeterOZ.Any update on the faults,just started with the same thing.

Many thanks rostbiff.