Hi Steve223,
Do you know it the Forumite from whom you got your slides is still producing them? If so could I hassle you to PM me his name?
Thanks, Rick
Printable View
Hi Steve223,
Do you know it the Forumite from whom you got your slides is still producing them? If so could I hassle you to PM me his name?
Thanks, Rick
The pipe work that runs down the drivers side sill and next to the seam in the R/H rear wheel arch are actually rear heater pipes not A/C. They can be moved as they only have coolant in them. I'm moving mine because oversize tyres can rub on the seam that protrudes into the wheel arch. Both the seam and pipe work is being altered.
I too have the Qld sliders, much cheaper than the imported ones and strong too.
I would also be interested in this...Quote:
Originally Posted by RickO
Mark
I can second this. They are a great set of sliders, very strong and easy to install.Quote:
Originally Posted by Redback
Check out the post on here - they're from Brad:
http://www.aulro.com/afvb/d3-d4-rrs/...sliders-2.html
Hi Rick,Quote:
Originally Posted by RickO
Only had his email in AULRO messages and they are deleted so unfortunately don't have his contact details.
Cheers
Steve
Brad - Forum name: Disco3QLD http://www.aulro.com/afvb/members/disco3qld.html
Pm or email him for a quote.
He gives you the choice of narrow or wide, narrow does not protude from the side of the car much.
Mine are the narrow ones.
https://www.aulro.com/afvb/images/im...014/09/319.jpg
Sorry don't have a close up at the moment.
Wide ones can be used as a side step.
I believe this is the place they are made:Quote:
Originally Posted by RickO
Metfit Industries