Picture of my rack http://www.aulro.com/afvb/d3-d4-rrs/...00k-today.html
Discovery 3-4 Slimline Roof Rack | Roof Racks | Opposite Lock
My rails were removed and new ones put on to fit this one
Printable View
Picture of my rack http://www.aulro.com/afvb/d3-d4-rrs/...00k-today.html
Discovery 3-4 Slimline Roof Rack | Roof Racks | Opposite Lock
My rails were removed and new ones put on to fit this one
Which rails did you have? And what did you end up doing with the old ones?
i am happy with the fit [ame]http://vid169.photobucket.com/albums/u227/jasonw2262/IMG_0738_zps0636ecc2.mp4[/ame]https://www.aulro.com/afvb/images/im...14/10/1445.jpg
Thanks a lot Jason, appreciate you taking the vid to show the fitQuote:
Originally Posted by gossamer
Attachment 84962
This is the Baja rack which utilises short roof rails which are from front runner. Apparently the new Baja rack does not require roof rails at all now
I like the look of the baja racks, but I don't like the weight. From the spec sheets I was looking at they where 45kg
I was considering one of these for my D4.
Land Rover Discovery 3 Discovery 4 L319 Alloy Roof Rack CAGE1650MM W Brackets | eBay
At the moment I think I will go with 3 Rola or similar bars on the rear section.
I built a loverly strong flat roofrack for my D2 with the thoughts of getting a roof top tent.In the end 99.8% of that racks work was carrying fishing rods in storage tubes or on the rack.The rest of the use was long items from the hardware shops.Thinking 3 bars may be good enough for my needs.
Andrew
Quote:
Originally Posted by shanegtr
Hmmm mine weighs 28kg. The new spec sheet says 29.5kg. Not sure where that info came from.
Attachment 84978
This is a shot from Wolf 4x4 product page for Baja rack
I got that info from the baja racks websiteQuote:
Originally Posted by Canaussie
Baja RackQuote:
Frame:1” (25.4mm), ¾” (19.05mm)* and 1/2’”(12.7mm)* Steel tubing
Wind Deflector:.062” (1.57mm), 5050-H32 Aluminum
Finish: Epoxy primer (rust inhibitor) with black powder coating
Rack weight:*100 Lb (45.5Kg).
Weight Capacity:600Lb (272 kg)
Measurements outside Frame: 50”(1270 mm) Wide x 92” (2336.8 mm) Long x 5” (127mm) tall
Mounting method:Roof Rail Mounts (4 brackets) and Roof Mount (2 brackets).
Mounting method BR-LR34RR-0: Rear Roof Rails (1 Passenger , 1 Driver side) and Front Roof Mount (2 brackets)
I gave the factory rails to a nice gent who posted a project building his own roof rack. It is in Projects but buried a little now.Quote:
Originally Posted by winaje
