So with the LR tongue can you tell me (if possible) what the distance is b/w the centre of the latchpin hole and the centre of the ball? Just trying to work out which length tongue to get - is it 190mm?
Printable View
So with the LR tongue can you tell me (if possible) what the distance is b/w the centre of the latchpin hole and the centre of the ball? Just trying to work out which length tongue to get - is it 190mm?
Can't check at the moment but seem to recall 175mmQuote:
Originally Posted by mawhite
LR specs see to say no greater than 160mm so perhaps that's the length. Looking at a 160mm ARK unit with 3500kg loading.Quote:
Originally Posted by winaje
I got the 160mm ARK unit with 3500kg loading from ISP for $100.
have been towing a 23ft caravan with it for 3 years.
http://www.arkcorp.com.au/p/3185/ark...ete-towing-kit
my LR tongue measures approx 155mm centre pin to center ball.Quote:
Originally Posted by mawhite
Quote:
Originally Posted by dazray
dazray, does the ARK unit have a solid or hollow square shaft?
The reason I ask is that I'm looking for one as well and my experience with the hollow shaft is that the holes and the pin flog out due to the small contact point.
hollow. Got mine for xmas.Quote:
Originally Posted by Peteren
If you fit one of those Anti-rattle pins it tightens the hitch to the receiver and remove any movement so you don't get the wear at the hole.Quote:
Originally Posted by Peteren