Was applying it sparingly at close range,Im sure the disc temps would burn it off in no time.
Andrew
Printable View
Was applying it sparingly at close range,Im sure the disc temps would burn it off in no time.
Andrew
One may wish to consider ceramic brake pads at the next install.
I installed Akebono pads a couple of years back; now there is effectively no dust to clean up. I think the ceramics work as well as the factory pads - they feel a bit different, but my 3 still seems to stop as required.
How are the rotors wearing?Quote:
Originally Posted by bbyer
Apparently cold tea is an excellent brake dust cleaner.
I'm working myself up towards doing pads and rotors on mine ... would be interested in what Dougal has asked ... also, are the ceramic pads noisy and what rotors are you using ?
I have heard cold tea as well think it might have been on the ABC nightlife.Quote:
Originally Posted by Dougal
I checked the dates etc and felt the rotors today.Quote:
Originally Posted by Dougal
I installed new solid vented OEM rotors and the Akebono ceramic pads in October of 2012 at 147,000 km.
I now have 198,000 km on the 3 so that works out to about 50,000 km (30,000 miles) over two years.
I can feel a slight ridge on the perimeter of the rotors of less than a millimetre.
The pad wear is probably 1 mm on the fronts and less than 2 mm on the rears.
There is effectively no dust but then there has not been that much wear either.
My driving is mostly City pavement but I down shift the majority of the time.
But black wheels look so damn ugly!Quote:
Originally Posted by ~Rich~
Quote:
Originally Posted by p38arover
To each their own.
(So much easier to keep looking good)
Beauty is in the eye of the beholder :pQuote:
Originally Posted by p38arover
hey i reckon the black rims look great !!!
I will look into the plasti dip :D