Red Arc Tow Pro in D4

Not sure if the D4 arrangement is the same as the D3. I mounted my main unit behind the plastic supporting frame just below the where the light switch module is located.

hi Jonesy,
Yep, i used two heavy duty cable ties and it wont budge.

heaps of room there too !

Brgds Paul

How do you get the light panel off?

Quote:

---

Originally Posted by catch-22

How do you get the light panel off?

---

From memory, remove the panel below the steering wheel (pulls off with spring clips), then get your hand up in behind the light switch panel and push it out. It may pull out from the front but it was easier to push from behind.

My TowPro (unit and remote switch) is mounted the same Muskies.

Cheers,
Chris

Cheers for that. Had to check. Done. Perfect spot for the Elite knob.

Quote:

---

Originally Posted by Muskie

haha, like i said - "mine is next to the light switch, easy to get to!" see below fyi

:p

---

Muskie, thanks for that info but how do you get that panel out (without breaking it)?

Mario

Quote:

---

Originally Posted by mkalpokas@mac.com

Muskie, thanks for that info but how do you get that panel out (without breaking it)?

---

Mario, refer two posts up by Chris ..... copied below:

Quote:

---

Originally Posted by cjc_td5

From memory, remove the panel below the steering wheel (pulls off with spring clips), then get your hand up in behind the light switch panel and push it out.
It may pull out from the front but it was easier to push from behind.
My TowPro (unit and remote switch) is mounted the same Muskies.

Cheers,
Chris

---

Regards,
Scott