Nanocom Evo for D4

Quote:

---

Originally Posted by SBD4

Terry, Baz has reminded me of an important point, I understand the IID BT tool is VIN locked where as the nanocom is not. With the number of vehicles you have the nanocom might be best.

---

IIDTool is VIN locked for enhanced functions as per below;
Standard diagnostic functions (all supported vehicles):
Fault read /clear
Live values
Control outputs
Service / test functions

Enhanced diagnostic functions (locked to VIN or requires additional VIN license for other vehicles):
Component and system calibration
Height changes
CCF editing
ECU flashing
ECU Info
Save / restore(suspension and CCF)

Vehicles Supported
Discovery3/LR3 L319 2004-09
Discovery4/LR4 L319 2010 and up
Range Rover L322 2002-12
Range Rover Sport L320 2005-13
Range Rover L405
Range Rover Sport L494
Freelander 2/LR2 L359
Range Rover Evoque L538
Defender L316 2007-15

Which cable to get?


NANOCOM Evolution Left Hand Angle Extension Lead or
NANOCOM Evolution Right Hand Angle Extension Lead


Darren..

A recent thread has lead me to ask this;


Does the Nanocom show the fault code (DTC) description or just the number?

Blackbox have a number of youtube clips showing their products including the Nanocom Evolution.


See if this takes you there [ame]https://www.youtube.com/watch?v=wlsfoEKzJaI[/ame]
otherwise search " Nanocom for CAN Bus Vehicles " within youtube.


I've been very happy with mine. There web portal " Genesis " has a useful tool to compare CCF's from different vehicles based on their VIN which I've found handy when I've made alterations to the vehicle. VIN's are now easy to come by since the deletion of registration labels. Both QLD and VIC allow you to search a vehicles current registration status and as part of that provide a full VIN so when you see a vehicle with the fitted features you may want to upgrade to just note their rego and search on the various sites. Many of the car sales sites both AU and USA provide VIN's with the vehicle description. You can also use these VIN's within Topix to get an as-built configuration.