Bullbar D4 MY14 Discovery on Bonnet

Not on yours! still has the infill under the light..

Looks like the new OL version has swept uprights to follow the grill

Quote:

---

Originally Posted by LandyAndy

The bars look much beter colour matched;);););)

Andrew

---

They do,but are much harder to keep nice and clean,particularly if white.Also, if you do a bit of beach work,you will notice some very small rust marks in some areas,particularly along edges.The white bar also shows scratches and marks easier than black bars.

I have had both,next time will probably go back to black.

Quote:

---

Originally Posted by LandyAndy

The bars look much beter colour matched;);););)

Andrew

---

Not once they're used! Where they scrape becomes very obvious!

Probably ok for a bitumen queen - Hey Andy :D

Quote:

---

Originally Posted by Tombie

Not once they're used! Where they scrape becomes very obvious!

Probably ok for a bitumen queen - Hey Andy :D

---

You are a horrible man Mr Tombie:p
:p:p:p:p:p:p:p
Andrew

[QUOTE=pprass;2363611]Here is the new OL bullbar fitted to our new MY14 TDV6. Looks very similar to the ones in Tombie's picture, which is odd as I was told that there are just 2 of these currently in Australia :confused:

Attachment 94056
Attachment 94057[/QUOTE

Out of interest, does the bar have the headlight washer installed, because I couldn't see it in the pic. Do you have the xenon upgraded lights?

tiddy

I'm finally having one fitted to my MY14 HSE in a couple of weeks by Opposite Lock in Welshpool WA. This is on recommendation from other members who have had it done there.
I agree about the run-around, most of the main dealers are franchises and I doubt there is any meaningful communication between them. Some know how to do it, some don't. If you are not in WA, I suggest you get your local OL dealer to phone OL Welshpool to get himself educated!

Quote:

---

Originally Posted by Boggs

I'm finally having one fitted to my MY14 HSE in a couple of weeks by Opposite Lock in Welshpool WA. This is on recommendation from other members who have had it done there.
I agree about the run-around, most of the main dealers are franchises and I doubt there is any meaningful communication between them. Some know how to do it, some don't. If you are not in WA, I suggest you get your local OL dealer to phone OL Welshpool to get himself educated!

---

Hey Boggs, which type of bar are you having fitted, the "landyandy type" bar or the updated style? My local OL franchise had not heard of an updated bar when I inquired today.

Cheers,

Quote:

---

Originally Posted by pprass

Here is the new OL bullbar fitted to our new MY14 TDV6. Looks very similar to the ones in Tombie's picture, which is odd as I was told that there are just 2 of these currently in Australia :confused:

Attachment 94056
Attachment 94057

---

Hey Ppras, where did you get your OL bar fitted? My local OL franchise has not heard of an updated bar.

Cheers,

Quote:

---

Originally Posted by cjc_td5

Hey Boggs, which type of bar are you having fitted, the "landyandy type" bar or the updated style? My local OL franchise had not heard of an updated bar when I inquired today.

Cheers,

---

Same bar as in Landy Andy's pic.. whatever it is..

Quote:

---

Originally Posted by cjc_td5

Hey Ppras, where did you get your OL bar fitted? My local OL franchise has not heard of an updated bar.

Cheers,

---

My local 4wd mechanic - Midcoast 4wd Centre in Port Macquarie NSW. They are an OL dealer as well and Darryn the principal was able to get one of 2 of these bars that are currently in Aus from one of the OL directors - the one that I got was supposed to go on the director's vehicle!

Peter