Here is my Rhino Pioneer roof. I have left rings on the top, but removed the tyre and the jerry can holder. Mine is the shorter length and hardly makes wind noise.
The side view it looks the same as the narrower version, note the low feet:
https://www.aulro.com/afvb/images/im...015/10/690.jpg
Close up to show height, note the ring which I should have removed (takes 20 seconds with a lever through the ring to loosen it,
it then slides to a gap in the roof material and it pops out)
the ring shown was one of three to strap the tyre down with, the third strap had ratchet lever to tighten the three straps hence locking the wheel/tyre down:
https://www.aulro.com/afvb/images/im...015/10/691.jpg
Three quarter from behind the roof still does not look that wide:
https://www.aulro.com/afvb/images/im...015/10/692.jpg
This looks less good I guess for those that like the narrower look:
https://www.aulro.com/afvb/images/im...015/10/693.jpg
Back View:
https://www.aulro.com/afvb/images/im...015/10/694.jpg
