2015 TDV6 wheel PCD

It would also be helpful,if the trailer could be made to track the tow vehicle.
This would be helpful,particularly in sand.

I loanedTrackTrailer (the makers of the Tvan) an 18" rim so that they could fabricate a hub to suit. They might be willing to help.

Cheers

Gordon

Quote:

---

Originally Posted by scarry

It would also be helpful,if the trailer could be made to track the tow vehicle.
This would be helpful,particularly in sand.

---

Any idea how close the D3/D4 track is compared to a D2???
My unfinished camper trailer has a D2 matched track/wheels.
Thanks
Andrew

Quote:

---

Originally Posted by Redback

Not D3/D4 alloys you can't, well unless you go 19s, but then you need hub centric rings and at what cost, show me alloys that will then fit the car and trailer as well, that don't cost a fortune and what happens when you get a flat, remember we are talking 18 and 19" tyres here.

---

Yes they can be made to fit parallel bearing hubs, the hub needs a small amount machined off it (irrelevant to strength) and a spacer plate made 12mm thick (use 12mm longer studs).

In fact it's easier than fitting D2 wheels.

Ring Coopers and ask for a D4 wheel conversion on a trailer, see who's number they give you ;)

And it's legal :)

Quote:

---

Originally Posted by LandyAndy

Any idea how close the D3/D4 track is compared to a D2???
My unfinished camper trailer has a D2 matched track/wheels.
Thanks
Andrew

---

D4 1612mm approx

D2 1540mm approx

Not far away

Quote:

---

Originally Posted by MR LR

Yes they can be made to fit parallel bearing hubs, the hub needs a small amount machined off it (irrelevant to strength) and a spacer plate made 12mm thick (use 12mm longer studs).

In fact it's easier than fitting D2 wheels.

Ring Coopers and ask for a D4 wheel conversion on a trailer, see who's number they give you ;)

And it's legal :)

---

Pointless going to all that trouble if the rims don't fit the car, and it may be legal in NSW with an engineers report, but that means nothing in QLD.

Baz.

Quote:

---

Originally Posted by Redback

Pointless going to all that trouble if the rims don't fit the car, and it may be legal in NSW with an engineers report, but that means nothing in QLD.

Baz.

---

What are you on about? The rims are genuine D4 wheels, unmodified.

With all due respect, just because you can't figure it out Baz, doesn't mean it's impossible...

Quote:

---

Originally Posted by MR LR

What are you on about? The rims are genuine D4 wheels, unmodified.

With all due respect, just because you can't figure it out Baz, doesn't mean it's impossible...

---

18" rims don't fit the 3.0l D4

As far as I'm aware, aren't spacers illegal and aren't mods like this, require an engineers cert.

Quote:

---

Originally Posted by Redback

18" rims don't fit the 3.0l D4

As far as I'm aware, aren't spacers illegal and aren't mods like this, require an engineers cert.

---

Had a look - spacers on trailers don't seem to get a mention...

Quote:

---

Originally Posted by Tombie

Had a look - spacers on trailers don't seem to get a mention...

---

Yeah I did notice that, what do you think in regards to needing an engineers cert, would this mod need it??