Printable View
Yes that would probably explain it. I will have to go back and have a look at my emails. It was 4 years ago. It was something to do with the reader autodetecting the protocol but selecting the wrong protocol. Once i manually set it to the correct protocol it was fine. The Reader could only read selected information so it was probably not reading the info on the second canbus system you mention.
Quote:
Originally Posted by LandyAndy
From what Gordon said on his course,its the entertainment system that runs the second canbus system.Quote:
Originally Posted by RoverLander
Andrew
I don't have a reader. The initial fault codes were from the NRMA service guy. The other faults I mention are what comes up on my dash.
Hi All,
Just a thought from reading other threads. Could my issues be caused by a faulty wheel speed sensor?
Anyway, car is off to the dealer tomorrow. LR Care have arranged a tow and, they have also dropped off a Range Rover Evoque today for us to use while the D4 is off the road.
Props to Land Rover Care.
A faulty wheel speed sensor would cause the ABS faults but not the ecm canbus shut-down faults. The ABS ecu not receiving ecm messages on the can-bus would also cause the ABS messages.
2 days in at LR and no word, it might have them baffled.
https://www.aulro.com/afvb/images/im...016/01/820.jpg
:(
Gulp. How's the loaner?Quote:
Originally Posted by Bradmc
Hehe, my wife said it is much quieter than the D4, but it is still no D4 :DQuote:
Originally Posted by Stuart02
She is a good woman. :)
Update: Car has been in at LR for 5 days. To be fair, I am not sure they have been working on it for 5 days, as it was towed in and was an unexpected arrival; so it may have been back in the queue of other vehicles booked in.
The issue they believe is a faulty Steering Angle Sensor (that may have been draining the battery). Part is ordered and i should have the car back on Monday.
Anyone have issues with that part causing similar issues?
Anyway, I will update the post when I get the car back and do a bit of my own real world testing; as in driving it.
Car is back. 😀
Multiple fault codes were logged in the system - U0001-88 High Speed CAN-BUS off / SASM (steering angle sensor) fault causing system to throw HDC and ABS faults.
Steering Angle Sensor replaced.
Car seems to be fine now. Now to reinstall my DBS.